budude wrote:The problem I see with the design are all the wires coming out the gland - they will not fit tightly enough together to make it waterproo...
Skunberg wrote:I was thinking after soldering all the wires on spray it down good with never wet and don't put them in anything. Just let them lay in ...
timon wrote:I don't think they have HDPE for 3D printing yet. They do have ABS but I think it takes a different head. So now were going to need 3D pri...
The sides aren't on at all in those renderings. The blueish transparent square is a silicon gasket for waterproofing between the case and the lid. T...
pmscientist wrote:The LED part looks good. I'm a bit concerned about your part list and statement on controlling AC SSRs. You need zero cross detecti...
Since everyone's work schedule seems to be the determining factor, how about those that are interested post a range of times and/or days of the week t...
For those interested (and that have not already started down the arduino path), these are the items at the moment I'm basing the instructional session...
As far as the hardware... I'm currently thinking about using a specific arduino based board, a bread board and set of LEDs. We will have the arduino b...
Livermore-Dad wrote:Let me know about the strips, More than happy to prepurchase to help offset the cost.. But do we have the specs on these vs just h...
juicedss wrote:No, I did not. I run the 4 Teensy16s daisy chained together off of 1 com port and the 2 renards daisy chained off another com port. B...
gdyrdave wrote:Vixen 2.1 had a live midi input plugin that was cool, but it never evolved to record the midi keys into the sequence. I am looking at b...
With the reality of the strips looking very likely now, I think I'm also going to look into having these strip connectors made. After I sketched this...
gdyrdave wrote:I personally would like to see a sequencer that would take input from a usb midi keyboard and map the keys to the outputs and be able t...
