Jrossi3334 wrote:I tried sending some data to the controller and like JP90 said it does blink the green light. However in my matrix of 1024 pixels the...
I created wireless Halloween costumes one year and ran the Pi and wifi router off This battery,
outbreak wrote:Thanks for this post! I'm looking at doing a show for our Annual Christmas Boat Parade. Here is a video of a boat I did.
Jsw2488 wrote:If u look past the colors there are some that are gray with a black outline they should be red, yellow or blue. They don’t even turn on....
ahh, the missing piece was the wipe color needed to be green. works now. Thanks!
jeffu231 wrote:Here is an option that may get you something similar. Create a layer with the Chroma key. In that config set the color to white. Then u...
Jsw2488 wrote:The image is the effect not showing a "pulse" I would check how you configured those elements. I'm thinking it may be that you confi...
P. Short wrote:So who will be the judge of whether a given display/effect is acceptable or not? exactly, They allowed me to write 99% of the new re...
I got it to work... Here's how I got it to work... Layers (in this order) -Default -Mask -Intensity Preview Layers Effect Settings:
MartinMueller2003 wrote:There is an ADA spec for that. A blink is 1hz or slower and a flash is faster than 1hz. they are not that knowledgeable with...
so here's an update... It ended up being just me working on getting our rules changed and after 6-7 months of meetings, demonstrating different light...
Jrossi3334 wrote:5.050 was the beta for the new version. 5.038-01 is the current working version. ok, numbering doesn't make sense. Also I'm sti...
ok, I know this is 2 years old but did the firmware update fix the issue where it doesn't fully load the E682 page when going through the FPP proxy? ...
JCook wrote:i was running v5.023 which is from a few years ago. I just updated it to v5.038, same issue. so I found the post where dkulp and John w...
