Yes, boards almost done. Be sure to view the tutorials. You will need to use them next week. Good luck on evrything. My direct connect method above wi...
Still thinking of options: your other board has an rs485 out? Can you remove it's rs485 output transciever from a socket? Can you remove the rs485...
have you tried swapping pic chips? maybe the first one in line is blown.
Bob - I feel like i should be on the road headed your way to help!!! i have a blank ren64 board but that would be a last resort. i don't have anythi...
Cypress - Plus we should have Art-Net support in our hardware so that might give you another angle in. --- All - For those of you that are bored a...
Answers: Vixen 2.5 - We already have the code for supporting both 2.1 and 2.5 in our plugin base so it is not a problem to continue. One of our beta ...
Plugin v1.0.0.1 Released Ooops - right out of the box one of the beta testers used a sequence of operations I hadn't used in a while on Vixen 2.5. Th...
J1Sys E1.31 Vixen Plugin Released !!! We've been real busy the last two weeks trying to build up three beta sets of hardware for our beta testers and...
DynamoBen - The start code for RDM is 0x40 ... I think RDM start code is 0xCC. who's right? -Ed
another thought. i use mcp23s017 chips anytime i need more i/o. you can bit bang an spi interface to it (if your pic doesn't already have a spi contro...
Also on a re-read of your post. You are 'planning' on using Art-Net over Ethernet for DMX. Don't be confused. Without a box like my new unit (this is ...
I think I see some of the confusion. You need to decide if you are doing TRUE DMX or Renard Style DMX. It will effect your software AND hardware. I wo...
Thanx for the example. I know there must me more software TODAY that supports Art-Net and doesn't support E1.31 yet. I will keep everyone advised of ...
Artnet support is not high priority but will probably get added by the time the hardware is available but may slip to 30 days later. I agree that E1....
In response to DMC's request for a drawing I've attached a pdf of a powerpoint that should demonstrate the topology of the system. I've also taken th...
