Ike
Ike
@ike
Eminent Member
Joined: Sep 30, 2011
Topics: 2 / Replies: 21
Reply
RE: New Hardware Developer - Putting lights on your homenetwork!

My biggest pieces of advice: 1) Don't be afraid to fail at something 2) Break everything down into small chunks 3) Don't worry about what you can't do...

14 years ago
Reply
RE: Water displays

I built a couple of laminar fountains a while ago using RGB LEDs but I wasn't exposed to Vixen at the time. Here is an amazing website for laminar fo...

15 years ago
Reply
RE: DirkCheapSSR INTEREST - Low current SSR

Off topic question, where did you get the green female plugs in Pic 3? Those look good and decently cheap.

15 years ago
Forum
Reply
RE: Check my math???

What if you cut the string down to 25 with no resistor and then never run them above 50% on the channel? Theoretically that should work. With only 25...

15 years ago
Forum
Reply
RE: PIC Programmer

For in circuit programming I use this from MikroeElektronika: MikroProg It works for PIC, dsPIC, and PIC32. It works with hex files so you can program...

15 years ago
Forum
Reply
RE: Prayer Request

Our prayers are with you. Hope it all went well and continues to!

15 years ago
Reply
RE: New Hardware Developer - Putting lights on your homenetwork!

kingofkya wrote:Also if you doing small test runs check out. fairly cheap 3board min Holy Guacamole Batman! How did I not know about this before?...

15 years ago
Reply
RE: New Hardware Developer - Putting lights on your homenetwork!

Currently this is a custom UDP protocol with associated Vixen Plug-In. The protocol and all my source code will be open source so it could easily be m...

15 years ago
Reply
RE: New Hardware Developer - Putting lights on your homenetwork!

kingofkya wrote:Very nice, Now if it had 16 channels i would be sold on it 🙂 Still very cool. The end goal will be to have 8, 16, and 24 channel ve...

15 years ago
Reply
RE: New Hardware Developer - Putting lights on your homenetwork!

SUCCESS!!! WOOOOOOOOT. My newest prototype 4 channel board is now fully operational and being control by Vixen over my home network with no errors! ...

15 years ago
Reply
RE: Home Theater PC vs Apple TV vs ???

Apple supports WAY LESS video formats than what you can run via an HTPC. That right there seals it for me. HTPC all the way.

15 years ago
Forum
Reply
RE: This DIY thing is pretty cool.

Now we just need to slap a PIC microcontroller i on that puppy and synchronize it to grill and pot stirrer...

15 years ago
Forum
Reply
RE: New Hardware Developer - Putting lights on your homenetwork!

Made some updates to my prototype and would welcome any additional feedback Change Log: New Zero Cross circuit using H11AA1 ICAdded ZC test pointMove...

15 years ago
Reply
RE: New Hardware Developer - Putting lights on your homenetwork!

Fantastic tutorial on how to solder SOIC for anyone interested. The youtube channel also has some excellent tutorials on QFN as well.

15 years ago
Reply
RE: New Hardware Developer - Putting lights on your homenetwork!

P. Short wrote: @Ike - what is that circuit around IC5 and IC6? I assume it's the zero-crossing circuit, but it's a little bit different from what I'...

15 years ago
Page 1 / 2