There was one guy that was using Wi-Fi snooping to try and detect different IP addresses attempting to find a connection. He tracked for a week befor...
Our neighborhood lines our road with luminaries on Christmas Eve, so there is always increased foot and car traffic. This year my show was up and runn...
Might try arduino 1.6.5, I had issues using 1.6.6
I'd go back to the beginning. Turn on only one controller with universes 1-12. Controller 192.168.1.110 Test that your string of 50 pixels work via ...
When your Windows pc disconnects from a router, (no longer getting an ip from a dchp server on the router), the ip defaults to a 192.254.x.x one. Over...
Can you post your xlights and controller setup pages? Have you rebooted controllers after making all the changes?
Yea, squirrels did it to my star about 4-5 years ago. Star was way up in a tree. Had used a guys cherry picker to put it up there. No chance to fix it...
Very sorry for your lose.
I'm using a 36w power supply and put a buck converter in each flood to drop it right to 24v. I'm running 10 floods on CAT 6 cable injecting 36v at th...
budude wrote:Remember too that you can 'dumb' down your smart pixels with most of the controllers out there so that you don't get overwhelmed with seq...
If he's running on a single 682, and using outputs 3-1 and 4-1, that's only going to be one supply. My theory is that when running the entire string ...
Hmmm... How many outputs are you using on the 682 to drive the 600 pixels? Not clear on how many pixels your driving from 30ft using the 3, 10ft exte...
People say nice things about Mark too.
I prefer the c9 shape for rooflines (I actually use gece lights which is a fatter c9 shape). I've seen many others prefer pixel strips for outlining W...
Re: Neighbor hooked: help me build an inexpensive "starter set" (300 pixels) Lowepg wrote:Seeing is believing!!! Thank you. Thats very cool. I don't...
