T.D.Sutton wrote: From the comments re the number of discrete pixels or channels that an ESP 8266 radio can handle, I gather I need to "tell" the seq...
The tree
I did something similar last year. 12x50 5v pixel tree (600 pixels), running from a single espixelstick. Ran pixelstick right from the power supply.
Phrog30 wrote:Why would you want to use his over BBB or raspberry pi? First, I made a mistake, I thought he was doing a 4x8 matrix (32 panels), bu...
The other option would be to use a different controller. RonP sells an E1.31 multicast controller for driving P10 panels. I use one to drive a 2x2 ma...
jerry72 wrote:Yep, renamed it firmware.eeprom Did you see John's post about needing to rename the file just 'firmware' because you have file extensio...
Thanks for that link. I can use one of these. Cheers!
Wildbill wrote:I flashed from 4.051 to v5 and everything went crazy ( rapidly blinking pixels outputs not working etc) flashed backwards to the last v...
Only issue I had last year was with a combination of reverses and zigzags on my porch columns. I decided to roll back my controller to v4 instead of ...
jerry72 wrote:I kept my universes at 510, should they be changed to 512? No, they should stay at 510 if you didn't change channels in your sequencer....
It may also have to do with 510 vs 512 channels in this firmware. If the channels per universe changed to 512 on some universe, it would appear as a c...
Spyder wrote:No. Over half of the configuration page would not load. For example the system command box was not there and I had html sort of gibberish...
Spyder wrote:I tried this on my E682 last night about 4 or 5 times in total. Everytime I tried to ping the controller the config page was corrupted. ...
GECE seems to be working, no?
angus40 wrote:Thank you for your reply Charlie . I have decided to power the pixels directly and only run data from the e682 . This will drastically...
