Sorry about replying to an old post, but this might help... Don't try and get a parallel port to work on your new computer, use an Arduino. It's pos...
Thanks for the reply, jeffu2231. I exported my sequence and the numbers all look good, so I believe the problem is probably in my dimmer board... Th...
Wow, this is pretty cool stuff... After getting past the 'one channel + header = no comm' problem, the rest of the sketch was cake. Pull in some dat...
Heeeey, it works! I punched in three more dummy channels into my Arduino code, and it worked with a header. Nice! Here's the code I'm using, it's b...
If the rest of you are wondering what we're talking about, check out this post... Turns out you can't have a header if you have a one-channel light s...
Heh, sometimes the best way to find the unexpected is to have someone who has no idea what they're playing with, well, play with it. No harm done, I'...
Thanks for putting up with me, LightUp. I know I'm having a hard time figuring out serial and whatnot, and it's hard to fully explain the problem I'm...
Alright, I found some code elsewhere in this forum and tried to edit it to work with the built-in LED in my Arduino Micro. I compiled this code into ...
Will Vixen quit sending data to the Arduino if that check isn't done? The problem I'm having is that no data at all is getting sent to the Arduino wh...
I'm with you on the 'header/footer' thing, there's no way to know if the bit sequence of a light show is sync'd without it, so it's pretty much necess...
Thanks for all the info, samples and examples, I appreciate it! One more question... For the hardware that I have, which would work better: Vixen 2 ...
