I think I cracked the code. Thanks guys!
Thank you Keith. Your enclosures helped and I was able to crack the code by reducing the number of channels from 510 to 384 in the last universe of t...
Ok, so here are my questions for my 2 X San Devices E131 controllers for my 24 strand, 93 pixel strands mega tree ( 12 strands per controller). 1. I...
Keith, I tried what you said and a little more and I have created more of a mess.....:neutral: I need to just start over with my set up both controll...
Ok, I need further help. When I test my megatree strands the first 12 strands running off the first SanDevice E131 device runs fine. It is getting t...
BTW, How does my model (12 strand megetree) in Xlights know to use the 2nd San Device e131 controller? I want the first 12 strands to be controlled b...
Keith, I plan on using either the laptop or the Pi. I see the problem with the first one. It's the second one that I really have a problem with. I...
I will. Thanks for your support!
It appears to work until I jump onto the the 2nd E131 SanDevice. So you would set this up differently then?
Here is my setup
Sandevice E131
Won't I run out of univeres? I can only go up to 12, right? BTW, I am new to setting this up.
I am sorry gassy, my renards don't run off the E131 device. The run in serial off a usb dongle
So I need a little more help here............ Did I screw up not only having 2 E131 SanDevices to support 24 strands of 93 RGB lights per strand. To...
