Activity
 
Notifications
Clear all
freyesee
@freyesee
Eminent Member
Joined: Dec 30, 2015
Topics: 0 / Replies: 22
Reply
RE: HolidayCoro xLights Model Issue

You can edit the model on xlights, I've had to do this before on a coro santa. You can go to the Model Data under the model settings in the layout Tab...

1 year ago
Reply
RE: Help me navigate my design for a Noobie

I would suggest dropping the F-Test since you don't really need that, I would consider that a nice to have that is not necessary on a starting budget....

1 year ago
Reply
RE: 3D Printed CG Enclosure

You can use a parametric Box like the one here and modify it to fit your needs.

1 year ago
Reply
RE: Interest Only - QuinLED-Dig-Uno and QuinLED-Dig-Quad Pixel Controllers

I'll be interested in a few as well a few 4UNO and 4QUAD

2 years ago
Forum
Reply
RE: Strip going crazy with no signal?

It should have worked if you connected the grounds together that way they reference the same ground

3 years ago
Reply
RE: Network setup using old router

On your laptop when it is connected to the network What IP is it? you can find this out from a cmd window or terminal on a MAC by typing ipconfig or f...

3 years ago
Reply
RE: Strange color in test mode

You can edit the start channel to match your first pixel channel in order to get the right color. In my setup I have the first 8 Channels used for DMX...

3 years ago
Reply
RE: xLight sequence not playing in FPP

Marci wrote:Fernando! It was the UDP out trick! It was set to none. I changed it to all it it works! Thanks so much for your help! What is UDP out? Tr...

4 years ago
Reply
RE: xLight sequence not playing in FPP

Remove all the outputs in the FPP and only leave 1 entry for your controller and add the IP in the unicast address and change the count to the number ...

4 years ago
Reply
RE: xLight sequence not playing in FPP

Did you resolve this? I would think that your FPP is just not communicating with your controller look at the Input/output tab on the FPP and make sure...

4 years ago
Reply
RE: Info to start FPP

First watch Canispater Christmas aka Jeff walk you through it Video. He does a great job of simplifying and walking you through all the steps. The BBB...

4 years ago
Reply
RE: Networking/Sandevices guru please

What is the Subnet Mask for the Falcon Controller your pc might be making contact but the controller doesn't know how to get back since you are just c...

4 years ago
Reply
RE: Trouble with ws2811 RGB's

I had a similar issue that was resolved by re terminating my RJ45 on the twisted pair ethernet cable apparently there was an nick cable or something m...

4 years ago
Forum
Reply
RE: request recommendations for reliable xConnect pigtail sources

Glycerine wrote:Agree with his agreement. Agreed with his agreement of the agreement.

4 years ago
Reply
RE: Network routing between interfaces FPP v6.1

I just use proxy, just go to the proxy setting on FPP and add the IP's to your controllers and save. Xlights has a proxy field on the controllers tab ...

4 years ago
Page 1 / 2
Share: