I already bought 10 of the modules
That's amazing! great work! I'm sold...
Sounds to me like there is a channel mismatch. i.e Element 1 (being the red of the first pixel) is being referenced as '1' when infact perhaps it is ...
djred2000 wrote:I am using a Teensy 3.2 and an ESP8266 WiFi module to capture the E1.31 date from Vixen and send it to the Teensy over serial. I am ru...
In case you missed the thread with my controllers - Theoretically, the code should work on the Due as well but I have not tested it (I don't have on...
Ok, so that one is using serial. Once again though, the amount of data you can get into the arduino is the limiting factor. Not it's ability to send...
When you say pixel controller, I guess I assume you mean something that will work with a light sequencing application. Most of these now use e1.31 wh...
The Due should be able to handle a buttload of pixels. The problem will be getting the data to it. I tried similar projects with a Teensy 3.1 and a ...
That's exactly what i done.
UPDATE - I discovered a bug in the code when using these with FPP and possibly other software when using more than 128 channels per controller. The c...
Ok, well the good news is that after doing some packet watching, FPP is completely in the clear - It's not doing anything wrong. My apologies for susp...
I'm really confused. it's as if there is something up with the arduino but I can't see what's going on. I guess the fact that it works fine with da_e...
A little progress - I changed the config to start at channel one, then as far as i can get is up to size = 126 before it wiggs out and does not work a...
