Yes, you should be able to connect them to a DC SSR just like you would any other light, as long as you don't exceed the current rating of the MOSFET ...
From what I can read, they draw about 1.7 amps. A normal DC SSR with the Ren64 should work. Alternatively, as BuzzKill suggested, you could drive a ...
MCM Electronics says they're back-ordered for 12 days, but I think that's what they said when I ordered a couple on Feb. 3, and they shipped on Feb. 1...
ukewarrior wrote:No, there is not a problem. ...This is known as common anode. You do not need to separate these connections... Looking at the pictu...
FWIW, I tried a broad selection of triacs last year from 12A to 25A in both Renard SS24s and Renard 64XC with SSRs and had no major issues. As is now...
I have received mine as well. Thanks! EasyGo
4 complete units for me, please.
Year before last, I ran my FM-02 from a 12-volt battery to avoid my noise problems. I trickle-charged during the day, removing the charger and connec...
And... it's funny to note that the 3rd officer, although faulty in his logic, would have had the more advantageous solution!
1.) Cuckoo 2.) 1st officer has the statistical advantage, although #2 could be correct, but JHinkle nailed it. 3.) Eisenhower? He was the only athlet...
Google for UCS5903 instead. Looks like several controllers for LPD6803 also work with the UCS5903, so protocol may be the same or similar.
Livermore-Dad wrote:One thing I have not found is coro local, nor have I found a reasonably priced source online... Search homedepot.com for "corrug...
Incidentally, you don't lose anything by renewing early... if your membership expires on Feb. 1, 2013 and you go ahead and renew today, the new expira...
As a follow-up to my comments earlier in this thread about my intent to convert to RS485-and-back for my GECE strings connected to my E681: it turned...
One thing to check is the web server on the RPM DMX bridge. I had to turn mine OFF, even though I wasn't using port 4; otherwise, it'd periodically f...
