duramadmax
duramadmax
@duramadmax
Noble Member
Joined: Dec 22, 2010
Topics: 68 / Replies: 836
Reply
RE: FS: Ray Wu Connector pigtails

Price Changed, see original post

7 years ago
Topic
Replies: 4
Views: 4049
Reply
RE: Falcon serial output

harpster wrote:Thanks for the info! Maybe the lower baud rate is why your getting better results. I don't know but I've always run my Renard SS boxes ...

7 years ago
Reply
RE: Falcon serial output

marknbacon wrote:Yeah I guess that’s what I’m going to end up having to do... the falcon passes the data through the serial out to the renards but it ...

7 years ago
Reply
RE: F16V3 to Renard

harpster wrote:The standard Renard SS firmware is for 57,600 baud so aI think that’s what most people are using for Renard SS anyway. Agreed and I ...

8 years ago
Reply
RE: F16V3 to Renard

gassy wrote:So, in order to use Renard off a Falcon I need to change the baud from 57600 (shipped with) to a lower rate? I run 115k since I have a D...

8 years ago
Reply
RE: F16V3 to Renard

harpster wrote:Yes, you can also see that on the screenshot in my previous post link. Here it is again. I only run Renards at the standard FW 57.6K. ...

8 years ago
Reply
RE: F16V3 to Renard

harpster wrote:I finally got to my storage locker to got some things so I could set this up. I can give more details as needed but basically this is t...

8 years ago
Reply
RE: F16V3 to Renard

I ran 115k on the bridge for many years. but tried after this season with falcon serial port. I will try reflashing to 56k to see if it changes.. than...

8 years ago
Reply
RE: F16V3 to Renard

Kev7274 wrote:I run my Renard off port #2 and no NO timing issues. What baud rate is your Renards at? 57k or 115k?

8 years ago
Reply
RE: F16V3 to Renard

Well I can confirm that Renard works off the F16V3 off serial port 2 because I wanted to consolidate my show down to F16V's and remove my E131 bridge....

8 years ago
Reply
RE: 2019 January Pre-Sale!

jchuchla wrote:If you can't otherwise get the nuts you need, you can likely turn the caps into nuts by drilling them out. I think the only real diffe...

8 years ago
Page 2 / 61