Yeah! Finally have working code with the help of my brother. Using the jcook code as a base, this is what we came up with. I have only tested it wi...
MartinMueller2003 wrote:Look at the JCOOK code. It has a state machine and minimal delay between received data and output. I've seen mention of the ...
Ok, I have confirmation! My original build log is quite lacking. Lots of pretty pictures, but actual instruction is poor. Pin 21 is grounded and th...
Pin 21 is grounded. I will clarify tonight if this is actually needed. I believe a floating ground is good enough. Pin 23 has a 1.5k resistor. 6 LOW...
I spent another few hours playing with this.. I put an LED on each of the SDI, CLK, and LE(ED1). I slowed all the timing down so I can even count the ...
Hello LightUp, Could you please confirm the latch state from the datasheet? According to the timing diagram, it shows the latch state low while data...
Thanks Barnabybear for verifying that you believe the code is good to shift the MBI5027. I do have the test LEDs setup to sink the outputs of the chi...
I really like that I2C idea, except I already have all of these...
Wow, that means a lot to me coming from you. I can only imagine what your 4x4 mini trees look like.. I bet they are awe inspiring.
Wow! Blast from the past, just received an e-mail update from this thread.. I actually prefer this video instead: Since I moved into the boonies,...
Well, it was free.. but I have since moved to the Colorado Springs area, so it ended up at the curb.
4586shaggy wrote:is this still available? Yup, let me know when you want to pick it up.
I bought mine for a media center.. Of course, this is after I spent $80 on a Patriot BoxOffice and $120 on a WD HD TV Live Plus.. but still, for $35.....
