I had not tried closing the browser but did try a different browser with no success. I just closed and reopened browser but no success. I understand...
2811 on 3 of the sticks and UCS29003 on 1. Once it occurs it does not seem to resolve until I power off/on and it does not matter if show traffic goi...
Smerk wrote:Is it possible that because the switch is green it does not detect e682 on the port? Because I get no light on the port that I plug the e6...
gocats7 wrote:Those of you mounting a PS with the pixelstick, what enclosures are you doing? I have considered the cg500 or a section of 3" PVC would...
nutz4lights wrote:Here is a test mode picture. I am totally pumped with how these look. Thanks again to plasma for the original video on modifying th...
kazanjig wrote:What protocol does the puck LED use? Ray's site mentions UCS2903. Is that compatible with WS2811? Does that even matter? Here is a li...
Well, I underestimated how long it would take to do 20! Have 10 done, should finish up Saturday. For a hook I am trying a self tapping eyehook, vel...
Stormyblade wrote:That one is great, but there's one that several here have linked that tells you how many power supllies you should use, based on tot...
I have setup modded RBL's with a 10' extension from Ray between each one - works fine...I need to power inject a little more frequently with these as ...
Stormyblade wrote:This link is great for calculations...thanks for sharing this! :happy: Now if I can just remember the calculation site that tells ...
ukewarrior wrote:Can you post the link to Rays store for the exact LED module you used? thanks. Here you go: I ordered 20 clear (specified clear ...
nutz4lights wrote:Looks good! I have mine in my oak tree but not connected, which is totally eating at me. I want to see them lit up! Work has been ...
nutz4lights wrote:I honestly can't see how that long of a cable would be a problem. The pixel IC regenerates the data I'm pretty sure and 10' isn't t...
