I have 4 sticks (3 running rc3 code a 1 v3 latest) all connected to a netgear R6400 dedicated to lights with its own SSID and all sticks are DHCP and setup as unicast. They are working fine from a controller perspective but after awhile - could be a few hours or a couple of days - I cannot access the webpage for the devices. Again, they continue to run fine from a show perspective, just cannot open the webpage to look at stats, make changes if necessary, etc. - they still respond to ping. Power cycle restores the access. I have tried from multiple browsers as well including iPhone.
Tried looking through posts but could not come up with anything...anyone else seeing this or have thoughts?
Thanks in advance,
Dave
Odd, you running ws2811 or GECE? Does it happen is there's no show traffic? Have you been able to log any serial output when this happens?
2811 on 3 of the sticks and UCS29003 on 1. Once it occurs it does not seem to resolve until I power off/on and it does not matter if show traffic going or not.
I'm not sure what you mean on the logging of serial traffic - let me know if there is something I can do for that.
For reference, when I originally connect to one of the sticks I typically just leave the browser window open...when I go back later (either hour or next day) I will see a websocket error - something like lost connection. I typically can refresh the page and the webpage will come back. Maybe leaving the page open like I do is causing issues over time? Again, the stick still runs the show fine and can be pinged, just no webpage after a given time period.
I will try restarting them today and make sure I always close a browser window to see if this has any impact.
DMJPixel wrote:2811 on 3 of the sticks and UCS29003 on 1. Once it occurs it does not seem to resolve until I power off/on and it does not matter if show traffic going or not.I'm not sure what you mean on the logging of serial traffic - let me know if there is something I can do for that.
For reference, when I originally connect to one of the sticks I typically just leave the browser window open...when I go back later (either hour or next day) I will see a websocket error - something like lost connection. I typically can refresh the page and the webpage will come back. Maybe leaving the page open like I do is causing issues over time? Again, the stick still runs the show fine and can be pinged, just no webpage after a given time period.
I will try restarting them today and make sure I always close a browser window to see if this has any impact.
Have you tried closing the browser out completely and reconnecting? I'll try to replicate the issue by leaving a browser window open, I usually close mine. The ESPixelStick will firmware will log things like websocket connections via the serial port / programming port for debugging. Not practical for showtime, but hand when debugging stuff on the bench.
I had not tried closing the browser but did try a different browser with no success. I just closed and reopened browser but no success. I understand now on the serial log - the display screen you can see on your flash tool - I may set one up here near my desk so I can keep an eye on that.
