Dennis Cherry
@dennis-cherry
Reputable Member
Joined: Dec 29, 2007
Topics: 24 / Replies: 280
Reply
RE: ESPixelStick 3.2 and DDP

I am using DDP on the EspixelSticks and is working better than E1.31. There is no compiling needed if you have V3.2 installed. Just make sure the seq...

5 years ago
Reply
RE: xConnect replacement O-Rings

Take one to the hardware store and match it to faucet washers. That is where I found extra ones.

5 years ago
Reply
RE: ESPixelStick 4.0.0-beta1 Release

firemedic04 wrote:Is there a limit to the channels used or are there specific output assignments? I was looking at using 100 leds per channel. The cab...

5 years ago
Reply
RE: Boscoyo singing stocking with matrix

That are going to be RGB Pixel flood lights, if I can find the 10W conversion kits for the Yard lights. Dennis

5 years ago
Forum
Reply
RE: LED keeper and fixing full wave leds

You probably have 2 or more bad LED's. Fix the first one then find the next bad LED. The second bad LED might be the first LED on that end of the st...

5 years ago
Forum
Reply
RE: Boscoyo singing stocking with matrix

rsegreto wrote:Do you happen to have any videos of the scrolling text? I know it's your first year using them so probably not but figured I'd ask. I ...

5 years ago
Forum
Reply
RE: Boscoyo singing stocking with matrix

I have 2 of the Boscoyo singing stocking with matrix. This is my first year to use them in my display. the toe of the socks will point at the window....

5 years ago
Forum
Reply
RE: What gauge wire for power injection?

If you lower the intensity of the LED's from 100% to 30% then 200 pixels will work without adding another power point. Most displays now use 30% inten...

5 years ago
Reply
RE: Xlights Not responding error when doing a FPP Connect

I have seen that on the XLights Zoom room when they are fixing users problems. It seems to be a normal occurrence as the gurus ignore it. You might g...

5 years ago
Forum
Reply
RE: anyone used this transmitter (eBay)?

Very low power, only 1 milli-watt. States you get 10-20 meters distance. Recommend a 10 to 100 milliwatt minimum transmitter.

5 years ago
Forum
Reply
RE: Happy Birthday jnealand

Happy Birthday Jim.

6 years ago
Forum
Reply
RE: 3D print your own led covers

Big Clive does some great work and videos. Very good video explaining everything. Dennis

6 years ago
Reply
RE: What to do with old LED lights?

1pet2_9 wrote:I agree with using broken LED strings as extension cords. Also, you can snip the male/female plugs off both ends, along with as much w...

6 years ago
Forum
Reply
RE: New Fantasmic Song

Excellent, very well done. Love your effects. :nasty::nasty::nasty:

6 years ago
Forum
Page 3 / 21