UPDATE: I can program the V3 Espixelsticks fine with the V3.2 firmware. V4 firmware still does not work, used the latest beta.
Here is the log file.
I just bought several ESPixelsticks from Forkineye, order was received and shipped in 24 hours, receive 3 days later. Shelby is fast on getting out t...
Portable Hole IMHO is the best, that way you are not restricted to only one place for the Tree. I moved my tree a couple of time when changing my disp...
Did you upload the XLight configurations to the Controller?
MartinMueller2003 wrote:While significantly more efficient (from a bandwidth usage standpoint), DDP will still swamp a WiFi network and cause lag. FPP...
I am using DDP on my V3 ESPIxelsticks with XLights.
P. Short wrote:One place to check would be ACE Hardware, although being independently owned some stores might not have some of the smaller diameter si...
Using the V4 software on either the ESP8299 or ESP32 with the memory cards, can you put the ESP's in Remote mode in XLights?
Happy Birthday Jim.
Antenna orientation is always critical. That is why there is so many antenna designs. I have found out that schedule 40 PVC attenuates the received ...
You are correct. just change E1.31 to DDP on the ESPixelstick v3.2 in XLights, save and upload.
Multicast and DDP are two different topics, you should be in multicast and you can either use E1.31 or DDP with multicast.
If you stapled the lights you might have put a staple through both wires. Look closely at all staples and pull any out that might be specious. You sh...
