it is difficult getting decent prises on good colour changing rgb lights etc. in the UK. Hopefully as more people start decorating the prices may drop...
can it do this at say 60 miles an hour??? now that would be special.:idea:
They are only for use on Private property over here in the UK. BUT thats not stopped anyone. Im just waiting for the first brat to crash into me when ...
I went for Vixen 3 (free) and a sandevice E682 kit. I currently only have a few strings of rgb piles and a few strips of noepixels but they do look ve...
If you click on the About button on the UTube page you can send a message I believe this is the page to send a message from. the user is called ...
is what you want something like this? You could send message to the guy through UTube about page. He might have plans its worth a try.
what type of LEDs are they. If you have RGBs I used a very cheap, but very well supported Adafruit Flora. You load the program using the Arduino IDE....
just watched some cookfamilylights on UTube great setup.
Always get the best power supply’s you can afford. Its a lesson you dont forget. If your power supplys are not rated to cover the amount of lights you...
removed my post as put in the wrong post sorry
I just bought an e682 kit I built it and tested it with my pixels. Then i set up vixen and started to programme the universes and outputs of the e682 ...
Thanks for this really useful Information I thought I was going mad (well dafter). It looks like I dont need a gross over cable as I did connect to t...
Thank you both now it sounds simple.. I was confusing myself with all the numbers led numbers , rgb x3, string numbers, controller number, univers...
I would go for the continuity test as above, or you can take the route you mention of tracing the wire visually. If you use that method you could mark...
