Well I'm thoroughly stumped now. I moved everything to its completely separate network (WRT54G -> D-Link DGS-1100-05 -> FPP & NSLM2 AP), and there's s...
sporadic wrote:Do you have any other devices associated to the AP besides the ESPixelSticks? Sent from my Moto G (5) Plus using Tapatalk Nope, jus...
Well, I tried a little earlier this evening and xLights does the same thing on my desktop workstation (which is not a VM) when outputting to lights, s...
jchuchla wrote:Are you really experiencing a couple of seconds of lag? That would be totally unusable. A few frames of lag would still be worth twea...
Well, I broke down and picked up an Ubiquiti NanoStation Loco M2, since it looks like a lot of folks where having good luck with that particular unit,...
Have you tried using sACNview to see the E1.31 data FPP is sending and verifying if it's correct or incorrect on the network?
jchuchla wrote:Multicast enhancement is in the Unifi Controller under settings / Wireless Networks / Advanced. It's the last checkbox in that section...
jchuchla wrote:ok, back to basics. Have you verified the following: Access point is only hosting one SSID. The one for the show. My SSID is 'show'...
I'm still having issues with some of my ESPixelSticks not processing multicast properly. Some, but not all. Everything's running 3.0, everything's got...
I did find one of my switches did not persist the "enable IGMP snooping" setting when I rebooted it, so I fixed that. Now I have the wifi on my deskt...
Thanks for the tups jchuchla. All the switches are managed and IGMP snooping is enabled (I think...I'll triple-check). I haven't found proper instruct...
stampedeboss wrote:After reenabling IGMP, did you reboot the AP and D-Link? I did reboot the AP, but not the D-Link. I did that just now (along with...
Here are some photos of my v2.0 boards (pardon the messy and beat-up work table). I ended up not using the solder in the kit on the lugs and used my t...
myoung84 wrote:I received mine yesterday and it's the correct one. Had it up and running in no time with FPP, once I finally figured out my USB cable ...
