Typically if the wire comes in a box and it's not on a spool that means it's designed to be pulled from the box. There's usually an opening it comes o...
What firmware version is the board at?
Aurbo99 wrote:Jim, Controller 1 ends at Universe 6 channel 426. If I follow your reply above, Controller 2 will need to be configured to START at U...
I think you need to have separate controllers setup. I haven't done any live testing to confirm this so I could be (and usually am according to my wif...
I've been telling my wife that keeping these carrier pigeons would come in handy one day...***legal disclaimer - this message has been sent via a sing...
I can only speak for a Ren-C / 595 setup with the 6804 but I imagine it's about the same. I used pins 4 & 5 from the Ren-C and connected it to clock a...
Excellent info.
aixelsyd wrote: I'll chop a unused PC power cord for this thing and be good to go with the ground. Gotta be safe. Just keep in mind PC power cor...
pmcpa wrote:They are a standard SanDevices build.... straightforward and easy! It's a nice compact board, built upon the reliable E68x series, so the...
FYI the document has a typo. it has the line " For example, if you want code 5, you would hold the button down until the red and green LEDs come on fo...
As I always like to say... Some days you're the dog, some days you're the hydrant...
shanicus wrote:I don't mean to hijack this thread but can you explain how you are able to drive: Renard, DMX and 2811 Pixels all from one E6804 board?...
I was able to get mine working with my Ren-C / 595 last night. Turns out it doesn't like going through the Ren-T.
jstjohnz wrote:The Renard mode was initially broken, but believed to be working in the latest version, see post#1. I downloaded it on friday and loa...
ok I'll keep playing with it. I couldn't get it working with my Ren-C / 595 combo.
