Sorry I guess I just needed to wait a while. Went back 10 minutes later and it let me flash it using the regular flash tool. I never was able to conne...
Figured out the port was being held open by a dialog in Device Manager. Closed that and the web flasher worked. Kind of. Now the stick flashes once ev...
Any guidance on getting the web flasher to see the stick on an otherwise working CH340 com port? I've pulled one of my sticks inside and connected it ...
MartinMueller2003 wrote: The flash tool will generate an EFU on demand. You then use the OTA function on the admin page to upload to the ESPs in place...
MartinMueller2003 wrote: Thanks for this... I'll definitely use it on the sticks I'm rolling out this year. This looks to require that I bring my e...
Yah that matches with what I've seen... seed pixels draw about 1/3 of a normal pixel. I've had success pushing 200 5v seed pixels at 50% with no power...
If I ssh to the Pi via the FPP interface, I get "You don't have permission to capture on that device (socket: Operation not permitted). If I ssh direc...
MartinMueller2003 wrote:I just tested the code and the display is blanked if I get a blank command from the FPP. Since it looks like there may be an i...
CaptainMurdoch wrote:FPP won?t send the blanking packet if the Blank Between Sequences setting is off. If it is on, then the blanking packet should b...
Thanks! I’ll give it a shot tonight.
MartinMueller2003 wrote:What software are you running on the ESPs? V4 does not have such a setting. I'm running latest V4 build. I was recalling the...
MartinMueller2003 wrote:What it really sounds like is that there is another device sending FPP Sync messages. I agree and I thought maybe I left "Se...
