MindTrik wrote:Can you post up some closer/clearer photos of the top, bottom and side edges of the window frame there?
Skunberg wrote:The outriggers can be screwed on so they came off. In addition to the outriggers I would also 8 to 12 guys from about 8ft high to the o...
beeiilll wrote:To remove the rods I use a pipe wrench and just twist and pull. They come out fairly easily. The ground rod worked better than rebar ...
Those look like a better alternative than these that I found. $6 versus $200
jnealand wrote:+1 on the ground anchors. I also had my early mega trees blow over until I started using the ground anchors. Several years back I swi...
todd1814 wrote:You could try adding some wood outriggers to your base. Attach a piece of 2x6 perpendicular to each side, in the middle of each side. ...
Today i set up the base and the tree is only about 10' tall because I didn't extend it or add any lights. I was just pushing on the pole and it was mo...
KewlWinter wrote:I too want to run my LOR controllers in DMX mode. I am running an E1.31 network with 5 RGB controllers, a mix of SanDevices, AlphaPix...
dsteward wrote:I have finally started trying to output from the program to the pixels, and have run into a snag (what a surprise ) The sequence works...
Scoobysnacks wrote:Thank you for posting detailed pictures of your mega tree bases you guys have been working on. They definitely provide motivation. ...
This board is great, but most important, if there is any issues at all, including set-up or user error, David will be there to help you through ANY is...
Creative Lighting carries a Fogger relay.
Since a lot of vendors sell the pixels in 50 count are you just cutting them at 20 pixels and attaching connectors or special ordering 20 count string...
