ezellner wrote:Can you post screen shots of your Display Setup page in Vixen, your E682 pages and your FPP setup pages? Ed, I did more playing and t...
ezellner wrote:You say the lights don't work as expected. What actually happens? Ed, they are not firing as expected. I know that they are out of se...
Ed, Early Monday and not enough coffee - it is 13-24 on controller #2!
OK, much like Cmschleich, I am having fits and starts with the mapping betweenb Vixen and FPP. I have 2, e682 controllers (both unicast, 1st is univ...
ezellner wrote:Your tree should be set up as 20 strings of 60 pixels. From the above, it looks like you have 20 strings of 120 pixels. If you want, we...
Ruppro wrote:In Vixen you will want to add a Megatree element that is 20 strings by 60 pixels (the physical layout of your tree), then you will want t...
MartinMueller2003 wrote:You have missed an important point. The distance issue is not from the controller to the furthest part of the string. It is th...
Rob, That's great news, then, after each mini tree of 120px, should I put a driver so the signal keeps strong, or is that single one at the beginning...
MartinMueller2003 wrote:Take V+, V- and Data and run it from the controller through the cable + Drivers all the way to your pixels. At the pixel conne...
Keith R wrote:The e682 should have more than enough power to get your signal to the end. You could then inject power to your trees, tying in the grou...
rstehle wrote:Correct Thanks! So I did some experimentation and believe I can get away with the following chain: E682 [Driver] +30' Cat5 [Driver] ...
Winter - can you share your Neutrik connector application? I am starting into the pixel world for the first time and have a situation where I am using...
rstehle wrote:I am now using Cat5 stranded cable for all of my long runs. I can go 30' easily from a Falcon controller. I use the Orange/White for d...
MartinMueller2003 wrote:The buffer does the same thing as a null pixel, but the buffers output is stronger than that of a pixel. On my display, I put ...
