Glad to have been of help.
OK, much like Cmschleich, I am having fits and starts with the mapping betweenb Vixen and FPP.
I have 2, e682 controllers (both unicast, 1st is universes 1-12 and other is 12-24). Neither is "full". Created both controllers in Vixen, mapped everything to them accordingly, have everything physically setup in my basement with actual length cords, etc. (my first year), and Vixen is working great! I made a little 1 minute startup test sequence that play exactly as I have laid it out in Vixen.
When I export the sequence, I pick Falcon Player Sequence, it shows me in the network section:
Controller Channels Start End
E682-House 6120 1 6120
E682-Shed 4590 6121 10710
When I go into FPP I have tried a bunch of different combinations but am unsuccessful at getting the lights to work as expected. I even tried (since the IP address of the shed is .3 and the house is .4), to change the order of the controllers in the Vixen output (putting Shed on top), but that doesn't help either. I don't have any FPP screenshots to include since I keep wiping out my attempts.
Any advice would be appreciated - I have looked at YouTube and have been reading a lot with no joy. This thread seems to be the proper one to post to for help!!
Best,
Charlie-
CFPSystems wrote:OK, much like Cmschleich, I am having fits and starts with the mapping betweenb Vixen and FPP.I have 2, e682 controllers (both unicast, 1st is universes 1-12 and other is 12-24). Neither is "full". Created both controllers in Vixen, mapped everything to them accordingly, have everything physically setup in my basement with actual length cords, etc. (my first year), and Vixen is working great! I made a little 1 minute startup test sequence that play exactly as I have laid it out in Vixen.
When I export the sequence, I pick Falcon Player Sequence, it shows me in the network section:
Controller Channels Start End
E682-House 6120 1 6120
E682-Shed 4590 6121 10710When I go into FPP I have tried a bunch of different combinations but am unsuccessful at getting the lights to work as expected. I even tried (since the IP address of the shed is .3 and the house is .4), to change the order of the controllers in the Vixen output (putting Shed on top), but that doesn't help either. I don't have any FPP screenshots to include since I keep wiping out my attempts.
Any advice would be appreciated - I have looked at YouTube and have been reading a lot with no joy. This thread seems to be the proper one to post to for help!!
Best,
Charlie-
In your description above for the second controller, you say Universes 12-24. Is that what you really have assigned? If so, you have an overlap with the first controller. It should be Universes 13-24.
Ed, Early Monday and not enough coffee - it is 13-24 on controller #2!
You say the lights don't work as expected. What actually happens?
