Please give him time. I have bought $900 worth from him with no problem. On the nov 30 order you should try a pm
I made the frame
I haven't tried it myself but, I have heard that you can take a blow drier and heat the wire up a little, then squeeze the socket on to the wire. Be s...
I did not go back an read the whole thread sorry,if it has been suggested but, I went to my local convenience store and they were more than glad to g...
Is there any reason you can't use spt-2 lamp cord? I have a ton of that, or do I need something else?
Have you built both of them? From your signature, it doesn't look like it. You need to look a little closer at my signature then. I gave my honest...
I did not see many entries and there are 4 nice prizes to be won. I wish I had some of their floods in my show so I could enter.
I don't get it either. You have been a member since 2008 your not a newbie. Your just new to DMX and pixels, but you have all year. I am in the same b...
Mac can these be run off renard 48 that I use for MM
From Jim Hello Kevin, The eeprom supplied with the kit is pre-programmed. *You don't need any additional hardware, other than pixels and power supp...
I have one and a fm 2. It will out work the fm2 with just the stock 12 inch wip, and set on low. I've run mine for 2 years with just the 12 inch wip ...
I think he sells them.
The HC can push more lights ,the SS is easer to put together ,the HC can run in US and over seas, the SS is offered in 24 16 and 8 Channels.
The SS renards are very easy to put together . The solder pads on the boards will take a little more abuse from first time solders. The SS boards do h...
