Activity
 
Notifications
Clear all
CatMan42
CatMan42
@catman42
Reputable Member
Joined: Jan 27, 2015
Topics: 18 / Replies: 345
Reply
RE: What enclosures for Robg's 20w flood board

Here's the link to the enclosures I bought...

10 years ago
Forum
Reply
RE: What enclosures for Robg's 20w flood board

BTW, it also makes them very compact. 4 1/4" by 3 1/4 ". So far have tested one of them at full white for over an hour. Seems to pull the heat off fai...

10 years ago
Forum
Reply
RE: What enclosures for Robg's 20w flood board

10 watt enclosures = less than $50 for 10. 20 watt enclosures (10) = $90 to $100+.

10 years ago
Forum
Reply
RE: What enclosures for Robg's 20w flood board

However, if you want the reflector, it's easily modified with a Dremmel !!! Done Deal!! Forgot that I used a pipe plug to seal the original wire ent...

10 years ago
Forum
Reply
RE: What enclosures for Robg's 20w flood board

So I've been playing around with different enclosures for the 20 watt 2811 floods from Robg and figured out how to put them in 10 watt flood enclosure...

10 years ago
Forum
Reply
RE: Lost

Just a quick update. I attempted to add an RTC to the BBB/octoscroller set-up. I know for a fact that this doesn't work.... It interferes with the ...

10 years ago
Topic
Replies: 3
Views: 1675
Reply
RE: What enclosures for Robg's 20w flood board

These work for the 20 watts....

10 years ago
Forum
Reply
RE: What enclosures for Robg's 20w flood board

I have an enclosure being delivered today. If it fits properly, I'll post a link to it.

10 years ago
Forum
Reply
RE: Lost

Fantastic, thanks

10 years ago
Reply
RE: Lost

jnealand wrote:You could also buy an octoscroller with an RTC built in and keep your current octo as a backup. Just depends on how you want to spend ...

10 years ago
Reply
RE: Lost

It can, but I was trying to avoid running an extra Cat5e out to it. If that's the simplest way to go, it can definitely be done.

10 years ago
Reply
RE: Lost

Okay, have all the dimensional issues and sequence issues figured out. Now I have a new problem. If I want this to work as a stand alone prop I'm goin...

10 years ago
Reply
RE: Lost

Started worrying about space requirements tonight. Pretty straight forward right? Config it as 8x1 instead of 4x2 and it should work, right?

10 years ago
Reply
RE: Lost

CatMan42 wrote: BTW, I finally managed to get the matrix working via FPP. The attachment is the only way I could configure the P10's in order to get...

10 years ago
Page 2 / 25
Share: