bshep
@bshep
Trusted Member
Joined: Jan 22, 2017
Topics: 5 / Replies: 44
Reply
RE: FOR SALE: HDPE Arch Tubing in San Antonio...

I sent you my paypal address by PM Blanco sounds fine as a meeting location, BTW do you have any idea the size of the tubing? Trying to figure out if...

9 years ago
Reply
RE: FOR SALE: HDPE Arch Tubing in San Antonio...

@Jguenther and @arm166: I also live in san antonio and I'd be in for 60' as well if you want to drive cost down further

9 years ago
Reply
RE: Project to use a pixelstick type device as a FPP remote.

I tried something similar about 2 months ago with the idea to upload a simple sequence to the ESP so it could run autonomously, i.e. power-on an seque...

9 years ago
Forum
Reply
RE: 100W RGB LED driver board for flood lights (WS2811)

Skunberg wrote:I am planning to slip a peltier cooler behind the led. So I'd have a bigger bump in the reflector and maybe two. Worth a try. How has c...

9 years ago
Reply
RE: 100W RGB LED driver board for flood lights (WS2811)

Skunberg wrote:Do you have any space between the LED and the reflector? Sent from my SM-G930V using Tapatalk You can see it mounted on the picture ...

9 years ago
Reply
RE: 100W RGB LED driver board for flood lights (WS2811)

pic of my retrofit. Sent from my iPhone using Tapatalk

9 years ago
Reply
RE: 100W RGB LED driver board for flood lights (WS2811)

MrSmoofy wrote:Well since you need 3amp that's more than 100 Watts so what about a LRS-150-36 the size of that is 159mm x 97mm x 30mm The enclosure ...

9 years ago
Reply
RE: 100W RGB LED driver board for flood lights (WS2811)

MrSmoofy wrote:Accept that seems expensive for that and I'm pretty sure the 100W requires a 36v power supply. See Post #7 gadgetsmith wrote:Yes, 3...

9 years ago
Reply
RE: 100W RGB LED driver board for flood lights (WS2811)

RobG wrote:This was already said, but I will repeat it. Power supplies that came with floods CANNOT be used to power ANY of my flood driver boards (1...

9 years ago
Reply
RE: 100W RGB LED driver board for flood lights (WS2811)

Cdanna77 wrote:Do you happen to have pics and a link for the 50 watt housing you used and how you made it fit. I've still been looks/ trying to figure...

9 years ago
Reply
RE: 100W RGB LED driver board for flood lights (WS2811)

I've been able to retofit the board into my 50W flood enclosure. The original PS in the enclosure is below its rated 50W, 1.5A, obviously not enough ...

9 years ago
Reply
RE: 100W RGB LED driver board for flood lights (WS2811)

I ordered a pair of 50W lamps from here last year: I'm going to see if I can retrofit the LEDs in the enclosure. I also have the 200W version which ...

9 years ago
Reply
RE: 100W RGB LED driver board for flood lights (WS2811)

got mine as well. I haven't been able to find a good enclosure yet... Any suggestions?Sent from my iPhone using Tapatalk

9 years ago
Reply
RE: What Do You Do For A Living?

Hospitalist (aka Internist that only works in the Hospital) In a prior life i had a business as an Electrical and Computer Engineer

9 years ago
Forum
Reply
RE: 100W RGB LED driver board for flood lights (WS2811)

any updates on this? Have you sent out invoices? I want to make sure I don't miss the email!Sent from my iPhone using Tapatalk

9 years ago
Page 1 / 4