Leglamp wrote:Even though you connected your rs485 according to the wiki, you need to look at the wire colors as they are on your cat 5 cable. I bough...
I also just tested the +5 to Ground and I have 5 volts DC Sent from my iPhone using Tapatalk
Leglamp wrote:If the led lights on your renard are not illuminated, check the fuse and make sure the power wire is actually inserted in terminal. Is t...
algerdes wrote:Are there any lights flashing on the SS24? Did you create the cable per instructions in the wiki? Note: only the first RS45 to SS24 n...
algerdes wrote:Are there any lights flashing on the SS24? Did you create the cable per instructions in the wiki? There are no lights flashing on th...
So the proper lights on the rs485 are coming on and it looks like the data is sending but I have zero Leds lit on the controller itself.
mt2525 wrote:Go into your Vixen setup page and right click on your renard controller and make sure you configured it to the right COM port. You can de...
zaker wrote:You have a USB to RS485 adapter correct, not connected to an Ethernet port? Check your baud rate, default Renard baud rate is 57600 Did ...
Nice work man! Sent from my iPhone using Tapatalk
Prayers incoming for God’s comfort and strength for you, your son and your family. Sent from my iPhone using Tapatalk
EMKLLK wrote:I agree with the quick sequence idea. Depends on which software you are using as to specifics, but they should all make this pretty simp...
scottmcm wrote:You can create a quick sequence with all channels on then just loop it. Or, if you have Vixen 3 just enable the web interface and then...
I’m pumped to get my show going but I’m afraid that I won’t get enough songs done. I just want three lol. Sent from my iPhone using Tapatalk
