maybe that's how I set it to a weird setting in the past, and like you said it's stored in a config file in the filesystem, and it was still there fro...
Yes, it was some previous version of V4, but I don't know exactly what version it was. Originally I used the java flash tool to build a .efu and flas...
Hmm, I disabled all of the outputs in the web ui, and then re-enabled them, and now the mapping seems to be correct - I get pixel data on GPIO_16 only...
angus40 wrote: Very informative . I'm interested in what chips you are using . I'll post some more details when I'm done doing the PCB layouts for m...
MartinMueller2003 wrote: Correct. I use 12v and 24v on the feed lines. Then run a tap to a buck converter very closs to the injection point. The buck ...
I just realized you're probably talking about 24V power and then stepping down to 5V at the pixels, not the data line and driving long cables, but tha...
angus40 wrote: it's been said a time or two here , 24V -> 5V via reduction . I like this scheme and will hopefully implement it . I unfortunately have...
So currently you configure them over rs232 with a simple command line interface. I was also thinking of making a little handheld "remote" that could p...
Another "pro" that I forgot to add (but can't edit the previous post as it's been too long now) is better use of controller ports. Load all your contr...
My plan is to have daisy-chainable differential inputs, just like smart receivers do, but because these are passive to the input signal, there's no li...
This week I did some work on the configuration side of the project, and now it can be configured / reconfigured in real time from a serial terminal. T...
I'm kind of curious how you implemented this, and what micro controller you're using. I had a very similar idea, and just spent a few days coming up w...
That does look very similar, but it looks like his implementation is a little different. Also looks like he's limited to 4 or 8 channels based on the ...
