For the form you could use cardboard concrete form tubes painted white. MIGHTY MINIS would probably work well in this application for the lighting.
Thank all of you for your help today. I am giving it up for rest. I'll tackle it tomorrow.
Wow, thanks Ed. I know what I did, I think. I have shorted some of the traces to ground by using too much heat in the desoldering operation. I have a...
Sorry, no plan c. 232 does not work either. I think what I did was burn the board with the soldering iron when desoldering. Now I think that some of t...
The connector broke before last season. It worked fine with the connector hanging by the wires. In fact it was working night before last. I decided to...
dirknerkle wrote:Bob, If worst comes to worst, let me know and I can overnight a Ren64 to you -- you'd have it Friday. OK Dirk. Are you sure you ...
Running 485.
Thanks Dirk. You're a Gem for offering, but I hope I don't have to resort to that. dirknerkle wrote:Bob, Here's a jpg of the circuitboard traces in ...
Thanks guys. Here is what I have. Measuring from pin 1, to 2 dead short, as it should be I think. pin 3 open. Pin 4 open. Pin 5 connection with 11.23 ...
I thought I could wire this up straight, but checking with an ohm meter it all checks good. I AM REALLY IN A PANIC HERE!! My daughters wedding is Sat...
budude wrote:Bob - - please re-read jrock64's post - it's pretty clear if you follow the link... Hey, I didn't follow the link, but I have now and I...
jem5136 wrote:I didnt mean to break any rules with this thread sorry. I will see if i can delete it. I don't think you did anything wrong. Someone c...
Google "electric match". It's what most people use.
I pray that God will guide his healers to the finest outcome for your daughter. And, may he grant you the knowledge that He is in control.
