You are selling your boards for $16.00 + Paypal fees and Frank sells his for $15.00 with no Paypal fees. Somehow I am missing the incentive here.
Merry Christmas everyone!! KC, Thanks for a great piece of software. Jon says hello. Brian
Thank You, I figured out that it had to be written on my production that had the actual serial ports being used, instead of my test machine where I cr...
There already is a LOR1 to Vixen sequence converter out there.
Why not look at EFX-TEK you can control the Prop-1 straight from Vixen and then the Prop-1 can control an AP-8 which can control up to 8 audio segment...
Thank you to all. I got it figured out, all I needed to do was switch the Blue and the Blue/White in my link cables. Thank you, Brian
Could someone tell me how to make a cable that would connect my REN24 V2.5 that have the input resistors crossed. I think it would be easier to just c...
phenagan wrote:Silly question, but do you have the plug-in set to the right number of channels? If it's set at 24 channels, you'll never get any data...
Virtus wrote:Is this correct? If you connect a single V2.5 it works okay but you can not get a second one to work down stream with a straight through...
I am planning on running them on different serial ports, however I want all of my hardware interchangeable. I also have 3 REN64 XB. I just do not unde...
I do not have a problem getting serial control to each of the controller, it is only when I connect controller 2 to controller 1. No downstream data f...
I would if it were LOR but it is AL and I have been burned by them and warned KC as well, so I prefer not to say there name whenever possible. I do h...
