Activity
 
Notifications
Clear all
aususer
@aususer
Estimable Member
Joined: Dec 14, 2009
Topics: 11 / Replies: 164
Reply
RE: Using a ULN2803A instead of DCSSRs

Venturing in here looking for a way to link my (yet to be delivered/built) PLCC6 RGB strings to my REN64. (been leaning towards aussiephils method) I ...

17 years ago
Forum
Reply
RE: First Etched PCBS!

You get a bad etch when: 1) you don't leave it in the bath long enough (not enough etched) 2) you leave it in too long (starts over-etching the tracks...

17 years ago
Reply
RE: Testing RGB LED String for 2010 project

Just a comment on the Cat5 cable. Cat5 solid core is for perm. wiring (ie between patchpanels and wallplates) - where it doesn't move often.. its the ...

17 years ago
Forum
Reply
RE: MOC3023 Input resistor Values

Aussiephil et. al., Rather than pay mouser $30 for delivery of $10 worth of parts, I've been looking at local, Aussie suppliers for a small run of SS...

17 years ago
Forum
Reply
RE: First attempt at soldering

Afroopuff wrote:Any suggestions would be appreciated Having desoldered thousands of 80 pin chips in a previous life/job (modem repair).. solder wick...

17 years ago
Forum
Reply
RE: MINI down Under (Melbourne)

WireWrap wrote:I'm sure that everyone appreciates the massive research and analysis efforts you have dedicated to this evaluation. Look.... just to...

17 years ago
Forum
Reply
RE: Anyone able to test some LED strings?

fj wrote: i just want to say a big thanks to yourself, aussiephil and aususer for helping me out on this !! Glad I could help.

17 years ago
Forum
Reply
RE: MINI down Under (Melbourne)

Its all good teamsters. I'm still in a job - this is all still on 😉 John's taking the lead on the mini... I'm just a lacky providing a place to have ...

17 years ago
Forum
Reply
RE: OFFICIAL GROUP BUY: PLCC-6 RGB LED's - Ends April 2nd

Bugger.. missed it - Damn work!! Sheesh.. If there are any leftovers... I would be keen for 200 (but will take experimental quantity too). Del to AUS...

17 years ago
Forum
Reply
RE: REN64XC.. my first foray..

YAY... Its all working! I am so proud! I am still missing 3x programmed pics (will get that sorted soon - hopefully with wjohn's help 😉 No urgency -...

17 years ago
Forum
Reply
RE: REN64XC.. my first foray..

Gotcha... OK.. For the record - I am only doing initial testing right now.. (have it plugged into a serialport and trying to work out how to drive vi...

17 years ago
Forum
Topic
Forum
Replies: 8
Views: 3391
Reply
RE: Anyone ever try to make strobes out of old disposable cameras?

Oh yea.. and there is another thread here somewhere about this.. but what about considering "potting" the flashes into a christmas-tree/star/santa/etc...

17 years ago
Forum
Reply
RE: Anyone ever try to make strobes out of old disposable cameras?

budude wrote:I tried connecting the 8 in series with a 12vdc source as mentioned - but ran into the issue also mentioned several times and that is the...

17 years ago
Forum
Reply
RE: Anyone able to test some LED strings?

I can't test (just yet.. still building) but they seem pretty cheap.. if your putting an order in - let me know and I'd like to piggy-back on too for...

17 years ago
Forum
Page 8 / 12
Share: