Anyone able to test...
 
Notifications
Clear all

Anyone able to test some LED strings?

34 Posts
11 Users
0 Reactions
17.8 K Views
Posts: 112
 fj
Topic starter
(@fj)
Estimable Member
Joined: 19 years ago
[#10944]

For a while now I've been trying to source some cheap LED's from overseas as they are just way too expensive here in AUS.

I have managed to get some samples from a Chinese manufacturer who was willing to deal with me and deal in small quantities.

They look like good quality but since I'm new to all of this I really don't know what to look for and I don't yet have the REN controllers to test them myself for misfires etc.

Would anyone in Aus be willing to take a look at them, test them on a controller and give me an honest appraisal of them for use in an outdoor display?

Here are the light specifications:

Voltage: 24V AC
# of LEDs: 100
Length: 10m
Bulb spacing: 10cm
IP rating: IP44

I ordered 4 strings - 1 white, 1 red, 1 green, 1 purple. The white and purple have 24V transformers with them and the other 2 have just bare wire ends for connecting directly up to the 24VAC SSR's. The strings seem to have rectifiers on them, I am guessing to make them full wave?

Prices I have been quoted are fairly reasonable - between $4.50 and $6.50 depending on colour (minus transformer, just bare end wires). Then there is shipping on top of that as well. I have been quoted shipping costs for delivery of 200 sets of about $450 via DHL. Quite pricey for shipping but add on the $2 or so to each string and they are still relatively cheap. All amounts are USD.

Please let me know if you are interested in testing for me? I'll send the lights to you and you can keep them as a gift for doing the testing.

Thanks, FJ


33 Replies
Posts: 1041
(@christmas-light)
Noble Member
Joined: 18 years ago

HI

Do you have some pictures ?? 😀


Reply
Posts: 496
(@wombat)
Honorable Member
Joined: 19 years ago

Hi FJ

I could do some testing for you. I have an Xmus REN 16 hooked up in a box with 24V transformer ready to test them. Could give you an appraisal of them send me a PM if you are interested.

Thanks
Wombat


Reply
Posts: 604
(@aussiephil)
Honorable Member
Joined: 19 years ago

FJ

i would be happy to test a string against a DC controller for you, to check suitability and performance with DC work.

I can test/measure light outputs as well

send a pm if your interested

Aussiephil


Reply
Posts: 175
(@aususer)
Estimable Member
Joined: 17 years ago

I can't test (just yet.. still building) but they seem pretty cheap..
if your putting an order in - let me know and I'd like to piggy-back on too for a handful of strings.


Reply
Page 1 / 7
Share: