Under $6 Bethlehem ...
 
Notifications
Clear all

Under $6 Bethlehem star, No welding

11 Posts
6 Users
0 Reactions
8,430 Views
Posts: 577
Topic starter
(@photovor)
Honorable Member
Joined: 19 years ago
[#8027]

I spent less than $6 creating this 6 foot tall Bethlehem star. It is made from 4 pieces of 1/2" grey PVC conduit, which Home Depot has for $.87 each. The back support pole is a 3/4" piece of grey PVC conduit.

I don't have a welder, so I had to be resourceful in how I put this together. To create the joints, I cut a piece of 1/2" PVC in half long ways, heated it with a heat gun, and bent it over the joint so it would conform to the pvc. I then glued the joint with PVC glue and added drywall screws for additional stability.

Overall, it's very rigid and should hold up very well. Now I just have to get the lights on it!

Detail of a joint:


10 Replies
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Well done!!! Can't beat the price, nor the convenience! Personally, I LOVE sheetrock screws... next to duct tape, they're a solution looking for a problem!

-dave


Reply
Posts: 40
(@reidfo)
Trusted Member
Joined: 17 years ago

Very nice job! It looks great, and from a distance even looks like it was welded. I agree with dirknerkle, drywall screws are as indispensable as duct tape!


Reply
Posts: 577
Topic starter
(@photovor)
Honorable Member
Joined: 19 years ago

Thanks! I personally love the foil backed duct tape. Actually, that would be a great additional re-enforcement for these joints as well. When I get some spare time here, I'll post some dimensions so if someone wants to build it, it'll be a good reference.

EDIT:

Possible Improvements to this design:
- Use actual PVC joints for the inner section. You'll still have to use a heat gun to get the angles right, but they may hold up better.
- When I did the joints, I just used about a 3" piece of heated PVC, which covered the front of the joint. Hindsight, I would have doubled that, so it could have wrapped the whole way around the back. Though, with the current method, it's very rigid.


Reply
Posts: 899
 lbro
(@lbro)
Noble Member
Joined: 20 years ago

looks great, I have a whole bucket of drywall screws..........


Reply
Posts: 577
Topic starter
(@photovor)
Honorable Member
Joined: 19 years ago

That would be a great display construction competition. PVC and drywall screws only.


Reply
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago

What about the duck-tape and tie-wraps?


Reply
Posts: 577
Topic starter
(@photovor)
Honorable Member
Joined: 19 years ago

Here are some videos:

- This one has a little more brightness to the video, so you can see the structure.

- Same sequence, but the contrast is up, so you can primarily just see the lights. (fixed the link)


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago
Photovor wrote:Same sequence, but the contrast is up, so you can primarily just see the lights.

-The right link.


Reply
Posts: 577
Topic starter
(@photovor)
Honorable Member
Joined: 19 years ago
ErnieHorning wrote:

-The right link.

Good catch.. wasn't paying attention. I corrected it above as well.


Reply
Page 1 / 2
Share: