rdj6107 wrote:i have alot of AC channels to use as well as alot of led strings. so deploy a mixture of both. my house is smart with pixels and my yard is dumb with AC lights. having a corner lot, long runs of a/c is alot more forgiving than long runs of data and pwr injection.
I've never run controlled ac lights. So to do that would be a little investment. I was just gonna stick the wireframes out in the yard with no control... but with the price of the lights(leds)... I'm going with pixels.
Sent from my iPhone using Tapatalk
rdj6107 wrote:i have alot of AC channels to use as well as alot of led strings. so deploy a mixture of both. my house is smart with pixels and my yard is dumb with AC lights. having a corner lot, long runs of a/c is alot more forgiving than long runs of data and pwr injection.
Pixels are a little more challenging to replace.
Sent from my iPhone using Tapatalk
Hi Mr Think
I don't know if you have seen this setup before but maybe it can work for your setup and add some pixels to your house you can do one buy one or add more power to run more than one they also sale just the controller with out the remote. You can also get this stuff on eBay or amazon
Good luck Bob
I forgot to put in the links
ThinkAgainAgain wrote:I'm sure this has been discussed before.Why are leds so expensive?! To me, it seems cheaper to run pixels. The lights(pixels) are cheaper, I don't need to buy different colored lights or covers. And I can control them with my show easily with my existing controllers.
I guess I thought led strands would of been cheaper these days.
Sent from my iPhone using Tapatalk
The one variable that has not been mentioned so far is the clips to mount the pixels. They cost around $.20 each vs. $.03 each for LED clips in the same qty.
I used the 1/4 clips with a small wire tie. Time consuming but effective.
Sent from my SM-G930V using Tapatalk
