New frame builds
 
Notifications
Clear all

New frame builds

25 Posts
12 Users
0 Reactions
13.5 K Views
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
cenote wrote:OK, you figured it out, now can you figure out what song it is ???

Well... I DO watch South Park :p so I believe it goes something like...

I have a little dreidel, I made it out clay ...

ג!

So - what do I win?!


Reply
kostyun
Posts: 2178
Guest
(@kostyun)
Member
Joined: 20 years ago
budude wrote:Well... I DO watch South Park :p so I believe it goes something like...

I have a little dreidel, I made it out clay ...

ג!

So - what do I win?!

But is it better than a Mr Hanky Mega Tree topper?


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

No - but definitely better than the Towlie banner - always smoke coming from it for some reason...


Reply
cenote
Posts: 350
Topic starter
(@cenote)
Reputable Member
Joined: 19 years ago
budude wrote:Well... I DO watch South Park :p so I believe it goes something like...

I have a little dreidel, I made it out clay ...

ג!

So - what do I win?!

Wrong Answer...Guess again


Reply
Posts: 2
(@djgreg3823)
New Member
Joined: 17 years ago

Hey Cenote:
Great frames! I am a noob at building my own. Where do you find your cold roll steel ( local supplier or web? ) Also any tips for someone starting out? I appreciate your help!
Greg


Reply
cenote
Posts: 350
Topic starter
(@cenote)
Reputable Member
Joined: 19 years ago
djgreg3823 wrote:Hey Cenote:
Great frames! I am a noob at building my own. Where do you find your cold roll steel ( local supplier or web? ) Also any tips for someone starting out? I appreciate your help!
Greg

I buy my steel from a local supplier. Luckily I have two of them very close to me which I deal with for my company. Very cheap from places like them. I buy it at about $2.00 - $3.00 per twenty feet. Places like lowes and tractor supply will rip you off. Seen is as high as $4.00 per 3' section. I would think you would get murdered on shipping off the web. Not many freight places deal with 20' long stuff.

I found it easy for us to have my wife draw the frame out with chalk on the floor, than start bending. Don't have to waste your money on a pipe bender or roller. Just find anything around that is solid and bend around. Things like bumpers, trees, etc. I built a stand that bolts to my floor, that has two small pipes welded to it about 3/8" apart, and I bend every thing around that. Than some times tweak it in a vise.

Hardest part I found is preping it for paint. I still haven't found a good method for this. I just came across a chemical which is used for cleaning auto body's before paint. You need something with a high flash point to clean with. All medal you buy has a lot of oil on it.

Planning on stripping off all the lights this year, sandblasting them this summer, and painting them with auto paint. The Krylon I used this year does not work. And if I hit the lottery, I will be paying somebody to powered coat them.

If you are serious, invest in a descent mig welder. You can search on hear for good ones. Always a hot topic on these boards. I suggest buying one with argon gas. Flux core welding is cheaper investment, but the core wire is very expensive, and I still have not seen a good weld come from one of theses machines. They work, but are real ugly welds. I scored one of my welders (150amp mig) this year off craigs list for $200, was like new from owner. Long story short, owner bought, assembled, never worked for him. Sat in corner of garage for years. I grabbed it, found that he assembled it wrong (gas line plugged, wrong polarity, wrong wire) and now it works great. I see them all the time on craigs list for good deals.

OK, enough out of me, hope this helps.


Reply
cenote
Posts: 350
Topic starter
(@cenote)
Reputable Member
Joined: 19 years ago

Here's a couple a newer shots. The first one is a shot of my bender I made.

DSCF7058
DSCF6685
IMG 1949

Reply
Posts: 2
(@djgreg3823)
New Member
Joined: 17 years ago

Cenote:
Thanks so much for all the great info to get me started. I really appreciate it!

Greg


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago

Yes, I have one of those $130 wire feed welders from Bottom of the Harbor Freight. They don't work well and they do not create a clean weld. Of course for Wireframes, it doesn't have to look perfect.

Chuck,
I want to build a bunch of animated wireframes. Does your wife Freehand those?


Reply
cenote
Posts: 350
Topic starter
(@cenote)
Reputable Member
Joined: 19 years ago
kjburns31 wrote:
Chuck,
I want to build a bunch of animated wireframes. Does your wife Freehand those?

Yes, my wonderful wife does 100% off the wire frame drawings. Some how, she can look at a picture, and than draw it any size on the floor. I knew I was keeping her around for something...


Reply
Page 2 / 3
Share: