My Mega star revisi...
 
Notifications
Clear all

My Mega star revisited...

7 Posts
5 Users
0 Reactions
5,766 Views
Jeff Millard
Posts: 1450
Topic starter
(@jeff-millard)
Noble Member
Joined: 19 years ago
[#3699]

Hi,

I finally got the Mig out and welded up the star for my mega tree. The last two times out it was made of #6 jacketed ground wire taped to a 3/8" steel bar. Now I've bent and welded 5/16" bar to it. I had intended to make ten sections rather than 5, but my welding skills leave something to be desired. I'll take it to work and wire brush it, then sandblast it. A little Rust Oleum and then I'll put the ropelight sections back on it with an updated cable to power it. Man I'm glad that's done. I used the grinder to remove about 3 times the weld material I left on the thing. It got better as I went along, but I've got a ways to go before I can readily create wireframes...

Hey Wayne... do you think Rousch needs a new welding apprentice?!? 😛

Jeff


6 Replies
Macrosill
Posts: 9739
(@macrosill)
Member
Joined: 20 years ago

Nice job. I think the star looks awesome!

Your welding skills may have something to be desired but atleats you have welding skills. I have a brand new wire feed welder, some leather gloves and an awesome professional auto-darkening hood but I have never welded anything, ever. I hope to fix that this weekend when I get some hands on lessons from the weld master himself, Wayne J.


Reply
Posts: 1168
(@keith-r)
Noble Member
Joined: 19 years ago
jeffmill wrote: I used the grinder to remove about 3 times the weld material I left on the thing. It got better as I went along, but I've got a ways to go before I can readily create wireframes...

When welding, the grinder is my best friend. It'll take off all bad welds. (And of course, when using any power tool, always remember to wear your safety gear, esp. your safety glasses)

Great looking Star!!!


Reply
Posts: 81
(@jeffrey)
Trusted Member
Joined: 19 years ago

Looks great to me Jeff!

[edit]Are you going to animate it or light it up altogether? I think I'd like to attempt something like that for the top of my mega-tree but I'm thinking I'll just have it all light up... give it a 3D-like effect.

Again, great job!


Reply
Posts: 66
(@thaiway)
Estimable Member
Joined: 18 years ago

Looks awesome Jeff! I wish I had a welder... heck I wish I had a garage to put a welder in! Let alone the experience... Put up a pic when you get the rope on?

John


Reply
Jeff Millard
Posts: 1450
Topic starter
(@jeff-millard)
Noble Member
Joined: 19 years ago

It was animated with 5 36" pieces of rope light before. I just need to wire tie the ropelight back on, and it'll be back in business. Won't be blowing in the wind like before...

Jeff

Here's a vid of TSO


Reply
Jeff Millard
Posts: 1450
Topic starter
(@jeff-millard)
Noble Member
Joined: 19 years ago

OK, Here's the ropelight back in place!!!! Time is flying by. It won't be long before the grass stops growing and I can get the rest of the tree back up. I'm adding some more clear minis this year so it will fill in a little when I blatently copy Carson's WIW....

Jeff


Reply
Share: