Mega Tree Hints and...
 
Notifications
Clear all

[Sticky] Mega Tree Hints and examples

81 Posts
38 Users
0 Reactions
142 K Views
pete
Posts: 562
 pete
Topic starter
(@pete)
Honorable Member
Joined: 19 years ago
[#5605]

Ok, After partaking in acouple decussions in chat on how to setup a mega tree. I thought I'd start a thread on it. I know this wont be the first nor the last on the subject. But what I'm hoping is to get a good selection of example ( Pictures of actual Mega trees) to showcase different designs. As well as example of different anchor methods for bith the top and bottom of the tree. I have included a drawing of the basics of a mega tree, I hope its helpful

Pete

Mega tree idea

80 Replies
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
pete wrote:But what I'm hoping is to get a good selection of example ( Pictures of actual Mega trees) to showcase different designs. As well as example of different anchor methods for bith the top and bottom of the tree.

I put a few shots in this post:

djulien wrote:this is my first year with a mega-tree (so I may be doing something stupid), but here are some pics of what I have so far

I'm not sure if those are the style you are looking for. If so, I can upload some more.

[EDIT] I finally wrote up what I did. It is at http://downloads.eshepherdsoflight.com/Howidid-MidiTree.pdf . There is a section showing topper, base, and setup/connecting the light strings.

don


Reply
Posts: 111
(@dadams14)
Estimable Member
Joined: 19 years ago

I had a metal post with 8 sets of white lights and 4 sets of red and 4 sets of green. I had mega troubles with my gfci tripping...
It may be the wooden box I used for ssr.
anyway we had a bad windstorm dec 27th and the whole thing came down.
SO next year I have to do better at guy wiring it up.


Reply
Posts: 25
(@tonyk)
Eminent Member
Joined: 19 years ago

Converting a Basketball Goal into a megatree

It probably shouldn't be called a megatree, because it's only 10 ft tall, but its the tallest tree in my yard, so it's mega for me. It could easily be adapted to taller designs.

My design goals were:
> Use things I already had and others were likely to have or could get easily and inexpensively
> Make it very strong to handle the winds and bad weather we have around here.
> Easy take down/setup with minimal storage space requirements
> A big goal that I couldn't find on other designs was an adjustable tension system on the lights so the light strands stay taught and don't flop around in the wind. The strands tend to stretch over time so it had to be adjustable multiple times as the strands stretch
> capable of high strand density so it looks great and can do smooth spins and other effects
> Have more of a tree shape and not so much of a tent shape
> Work with the 23ft light strands I had on hand
> Avoid GFI trips
> Inexpensive to build. I like the lights but would rather spend more money on my family than on blinking lights.

We have this basketball goal that never gets used anymore and my wife wanted me to get rid of it. So I did, but not in the way she expected 🙂 It's one of those cheap ones that has a plastic base that you fill with sand or water for weight. I was tempted to continue to use the base, but it doesn't sit level in the yard, and it had fallen over before in high winds and dented a car, which really made me mad 🙂 , so I decided to ditch the base and make my own.

You could just as easily use PVC pipe instead of the basketball goal post, so if you don't have the basketball goal, you can still do this project and keep it cost effective. One of the benefits of using the basketball goal post is it's height can be adjusted so I was able to lower it to 9ft so it would fit in my garage while I was building it.

What I came up with is a wooden octagonal base which supports the post and the bottom end of the lights, with a PVC drain on the top of the post to support the lights at the top of the post. The octagonal base of the tree looks round from a short distance and can be built out of wood fairly easily (if you have a miter saw - lots of angles to cut).

I completely disassembled the basketball goal. The main part I wanted was the post. It's strong, adjustable height, painted black, just perfect for my use. In the end, I ended up using almost every piece of metal from the basketball goal. By the way, you can do this without destroying it, so if you want to keep using your basketball goal when done with the tree, keep all of the parts and put the goal back together. I had a mandate from my wife to get rid of mine, plus I was still not happy about it denting a car when it fell over, so I was more than happy to make this a permanent change.

I attached what I could of the build instructions, but I couldn't post all the photos due to attachment limits. Will be happy to email detailed photos, etc for anyone that would like them.


Reply
thight
Posts: 25
(@thight)
Eminent Member
Joined: 19 years ago

TonyK-
Thanks for posting your example of the converted basketball goal. I really like the octagon base, and am interested in any measurements/instructions you would be willing to share. I appreciate the creativity. Regards,
tlh


Reply
Page 1 / 17
Share: