light covers and cl...
 
Notifications
Clear all

light covers and clips

10 Posts
3 Users
0 Reactions
6,099 Views
Posts: 2048
(@scootchu)
Noble Member
Joined: 17 years ago

Jason, Do you have any pixels in your display now? You could use xLights to create a custom model and define each pixel's color instead of mechanically changing the color.


Reply
Posts: 1133
Topic starter
(@toozie21)
Noble Member
Joined: 19 years ago
scootchu wrote:Jason, Do you have any pixels in your display now? You could use xLights to create a custom model and define each pixel's color instead of mechanically changing the color.

I do have pixels (I have one matrix), but I have to imagine that the cost of doing it for my wireframe would be double or triple the cost (though I haven't actually done the math yet). It is one of those over the driveway arches like this: http://www.christmasdonebright.com/lighted-displays/santa/NORTH-POLE-ARCH-LED_2 , so A LOT of pixels would be needed.


Reply
Posts: 2048
(@scootchu)
Noble Member
Joined: 17 years ago

Wowee, thinking about how it would look over my driveway. I want to build one!


Reply
Posts: 1133
Topic starter
(@toozie21)
Noble Member
Joined: 19 years ago

I got lucky and someone gave me the frame for free when they were moving. They never did anything with it and had it sitting under a trailer rusting the whole time. Sadly, they bought only the frame, so that I why I am trying to figure out how I want to light it up. The rope lights seemed like the best approach, but I am concerned about all the tight bends and cutting on set intervals. It might be easier to just go with M5 LEDs and put caps on them to color them...


Reply
Posts: 2048
(@scootchu)
Noble Member
Joined: 17 years ago

Yep, you are probably right. That would be a lot of pixels and probably more complicated that would have to be.


Reply
Page 2 / 2
Share: