What about some 4mm coro? Could cut to same shape and zip tie to frame, then drill holes for pixels.
Coroplast 48 in. x 96 in. x 0.157 in. White Corrugated Plastic Sheet
https://www.homedepot.com/p/Coroplast-48-in-x-96-in-x-0-157-in-White-Corrugated-Plastic-Sheet-CP4896S/205351385
neonexpresso wrote:What about some 4mm coro? Could cut to same shape and zip tie to frame, then drill holes for pixels.Coroplast48 in. x 96 in. x 0.157 in. White Corrugated Plastic Sheet
https://www.homedepot.com/p/Coroplast-48-in-x-96-in-x-0-157-in-White-Corrugated-Plastic-Sheet-CP4896S/205351385
That’s an idea.
Sent from my iPhone using Tapatalk
EL wire basically looks like neon, but without the 2 kilovolt flyback transformers. You basically feed it a DC voltage.
http://www.elwirepros.com/
https://www.instructables.com/How-to-make-EL-Wire-Art/
Any DC controller will work. It's just that an Arduino with an El Escudo shield is best (unless you're doing a wearable, which you're not).
Of course, if we were talking about Halloween, let's go back to using those 2 kilovolt flyback transformers..... :evil::nasty::nasty::holloween::holloween:
Simple way would be to zip tie pixels to the frame (as you said in your request). Zig-zag back and forth then add a custom model to your sequencer.
I took large tomato cages and wrapped lights around the outside then wrapped heap garland around them to make them look realistic during the day.
I currently use single color strings but i believe that the pixels would look good also. The led strings light up the whole tree while the garland makes it so that you do not focus on the individual strings.
