I know this is a tough question but I have zero experience with wireframes so it's hard for me to even guess. I was looking at strands of 70 led's. Wondering roughly how many I will need for the one large 6 channel face in the middle.
You might put your clips on first and that should tell you how many lights you will need 20-35-50-100-so on) or you will need to put your clips closer or futher apart so you can get the correct amount of bulbs or leds.
Where do you get clips for there? I was gonna use zip ties. I got 1000 of them from Monoprice for about $3.50.
You really want to use clips. They are much faster to use, and you can move them around to get the spacing you need.
I got mine from here. They have regular and perpendicular (light bulb facing out) clips.
http://www.ledlightsunlimited.net/contact.html
Do you guys use one clip per light? At that rate I'll be spending $100 just in clips...
n8huntsman wrote:Do you guys use one clip per light? At that rate I'll be spending $100 just in clips...
Are you going to be using over 4000 lights on your wireframes?
I bought 48 strands of 70. Since they will be talking faces, I will have to have more than normal. I want to do something like these faces:
Well with shipping and all, you are looking at about $100 in clips. Going with the zip ties would be a more economical solution.
These are a lot more affordable. I have bought these in the past and you can get different colors. I have done just about every way of attaching lights to wire frames. Spend the money on the clips. You wont be sorry. The zip ties will come loose and besides you have to remember doing repairs, adjustments and replacements. The clips make life much easier which is worth the money. You really cant beat the price of these in 9000 increments.
http://www.christmaslightclips.com/christmaslightclips.htm
