Another Mega Tree S...
 
Notifications
Clear all

Another Mega Tree Star

9 Posts
7 Users
0 Reactions
8,046 Views
Posts: 91
Topic starter
(@marble42)
Estimable Member
Joined: 17 years ago
[#10999]

I saw a star like this somewhere DIYC but don't remember where so i cant take the credit for it .

Made from 3/16 cold rolled 6 pieces bent and welded to the center post.
Made one change this one has six sides not five. I used a 3/8 piece of hex for the center.Made it easy to get the spacing right. It is two foot high over all.
Takes 50 lights to go up and down so it has three channels.

100 2886
100 2882
100 2883

8 Replies
Greg in Canby
Posts: 854
(@greg-in-canby)
Prominent Member
Joined: 19 years ago
marble42 wrote:I saw a star like this somewhere DIYC but don't remember where so i cant take the credit for it .

I used a 3/8 piece of hex for the center. Made it easy to get the spacing right.

Hex stock . . . GREAT idea!


Reply
IdunBenhad
Posts: 1603
(@idunbenhad)
Noble Member
Joined: 18 years ago

Hi:
Very nicely done. Want to make me one?


Reply
JasonPortwood
Posts: 753
(@jasonportwood)
Noble Member
Joined: 17 years ago

Having bought one and seeing this I really like yours. Makes me want to now go read up on wire frames / bending / and all. At least I should stock up on clips for the star I have. I used rope light and tie wraps but I'd rather switch to LED lights and clips.

Jason


Reply
IdunBenhad
Posts: 1603
(@idunbenhad)
Noble Member
Joined: 18 years ago

Hi:
Great idea and construction. Want to build me one?

OOOOPPPPSSS

Sorry about the second post. My computer is screwy this morning and didn't show the first post until after I sent this one.

Back to bed.


Reply
Page 1 / 2
Share: