I have a question about the wipe effect.
For this example lets say I have a string of 100 RGB nodes. I have the string set up as a 'Generic Numbered Group'. Within the sequencer I have been able to apply the wipe affect to my element and the wipe effect makes the lights 'streak' from one end of the string all of the way to the other end. I have got this to work fine for me. My question comes when I only want to use the wipe effect with the middle half (RGB nodes 25-75) or middle third (RGB nodes 33-66) of the string. Meaning only 'wiping' from node 25 to 75. Can this be done?
This was much more difficult to describe than I imagined.
You can only apply the wipe to a whole group, so if you wanted to apply it to part of your group, you would need to copy those elements into another group.
You can use the same elements in multiple groups. This is a great way to use the same elements and effects in different ways.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
I have another question about achieving an effect using 'wipe' or possibly even using another effect in Vixen. I have a line of pixels across my roof. I am wanting to turn the string on as a 'wipe' starting from one end of the string to the end, stay on for a bit, then reverse the 'wipe' to turn the lights all off.
I have attached 2 screenshots. The first basically shows the effect I am trying to achieve and the second shows what is missing to achieve the desired effect. (similar to the curtain effect if you're familiar with that from Nutcracker). This seems really simple to do, what tricks am I missing?



