using arrow keys in...
 
Notifications
Clear all

using arrow keys in sequence editor

12 Posts
6 Users
0 Reactions
5,029 Views
Posts: 355
Topic starter
(@bernard-2)
Honorable Member
Joined: 12 years ago
[#41203]

It would be nice to be able to use the arrow keys while in the sequence editor (up / down to go from 1 element to the next - right/left to go forward/backup) and not have to use the mouse. Maybe this feature exists and I do not know how to configure it?

If not available, will it be added in a future release?


11 Replies
JCook
Posts: 1003
(@jcook)
Noble Member
Joined: 13 years ago

I'm not sure I see the benefit in this as you need the mouse to add the effects from the effects tree. Maybe you could expand on your idea. When would you want/need to do this? after the effects are placed in the timeline? We use the left/right arrows to move effects to align them. To move an effect with the arrows keys, select the effect, hold down Ctrl then use the left/right arrow to move it.

Jay


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

Most of the sequence editor is designed for two handed operation. Left hand in the keyboard and right hand on the mouse. Timeline navigation is primarily done with the mouse scroll wheel. And holding control or shift while scrolling determines exactly which action happens when scrolling. Control scroll zooms, scrolling with no key held moves the timeline. And it does work in horizontal and vertical mode if your mouse supports horizontal scroll.
The full list of keyboard shortcuts can be found in the documentation on the website.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
Posts: 355
Topic starter
(@bernard-2)
Honorable Member
Joined: 12 years ago

Pg up and pg dn buttons help navigating through the screen. It may jump further though than what you want to see though.
Using arrow up/down, instead of having to grap the mouse and the slider, would allow to move through the screen one row at a time; just ease of navigation! Same for scrolling through the timing (left/right).

under vixen 2, you could use the arrow keys and I found it very helpful for copying effects:
Select an effect (or multiples ones)
copy (ctrl+c)
scroll up or down using the arrows
paste (ctrl+V)
and the copied effect would be already aligned and positioned exactly at the same location as the original one (no need to use the aligned function)

I find myself aligning effects a lot when I copy one effect from one element to another because they are not exactly positioned at the same spot; I copy an effect, then go to the element I want to copy it to, click on the timeline, past the effect and then align it with the original effect because I can never position right to start with when I click on the timeline...but maybe it is because I do not master the program and do not do it right to start with.

Thanks for the support and advises!


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

Yeah, 1+, and put back the DEL key too, please


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

I guess I'm having a hard time figuring what object you want to navigate. In v2 you would navigate the grid cells and only one thing can be in each cell, so the selection of what was in that cell is implied. V3 doesn't have a grid of cells, so what would you propose to navigate? Sure there's element rows, but a row can contain many many effects at the same position. So selecting a row wouldn't imply selecting an effect.
The standard keyboard shortcuts for cut copy and paste do work as expected, as does delete.
I'll reiterate, you don't need to grab the slider with the mouse, you just use the scroll wheel on the mouse. You really never need to take your right hand off the mouse. You need the mouse for so many things anyhow, that coming up with a mechanism to navigate a free form timeline with keystrokes doesn't make a lot of sense. It would actually create more back and forth for your hand and slow you down. All of the alignment tools (except nudge) are based on mouse events anyhow. You have to click on property grid items to alter effects, you need to drag effects to the timeline to add them.
I think you may be on to something that your request is based on being familiar with a fundamentally different program. And that you're probably not fully aware of the tools and methods vixen has to offer. For example, to duplicate an effect, hold down control and click the effect you want to copy, and while still holding down drag it to the new position. If it's on a mark or against another effect, it will snap to position and alignment should be a non-issue. But if it is, go ahead and finish copying as many as you want to start at that point, and then use the alignment tools. Group select all of the elements you want aligned and right click on the one that's in the right spot. Then use the appropriate alignment tool from the right click menu.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
Posts: 355
Topic starter
(@bernard-2)
Honorable Member
Joined: 12 years ago

familiarity with Vixen 2 of course comes to play. Still learning Vixen 3.

I am familiar with the alignment tools. what is happening is that when I drag an effect to copy it, it is difficult for me to drag it "straight" up or down and any little shift will position the effect not where I want it; I then use the alignment tools to clean up the job.

Since V3 does not have the grid cells, maybe duplicating what V2 was offering in that case is not possible; select an effect, copy it, arrow up or down to the element (called channel under V2?) where you want the effect and paste it.

Maybe I was not clear enough in my earlier post. Let's say an effect for 1 minitree starts at 1:02:00. Once selected and copied (I like ctrl+C), I want to copy it to a wreath located 2 rows below. Clicking twice the arrow down, would it be possible to "carry" the effect down and then paste it (I like ctrl+V) right there, which would be at 1:02:00. When I do this while dragging, there is a chance I will not be at 1:02:00


Reply
Posts: 376
(@gnarmstr)
Reputable Member
Joined: 13 years ago

if you hold the Ctrl and alt key down then click effect And drag. This will copy the selected effects and move them vertically and moving the mouse left or right will not move the effects horizontally. No need to copy and paste, and no need for alignment tool.

Hold just shift key down and select and drag effect does the same but will not cop just move.

Also turn on resize/draw indicator in the edit menu and this can help with aligning when moving effects around.


Reply
StickyWicket
Posts: 548
(@stickywicket)
Honorable Member
Joined: 14 years ago

To copy elements to a new row in the same exact position I highlight what I want to copy, click copy, and then select the whole element row of where I want to paste (Do this by clicking the name of the element on the far left, in this example Right Megatree Star)

You'll know the whole element is selected because it will have a dark blue frame on it:

This is what it looks like when NOT selected:

And finally after either clicking the paste button or CTRL-V, you get perfectly aligned duplicate effects:

As a side note, you can copy and paste multiple effects across multiple elements at the same time.

WholeRow
NotWholeRow
Pasted

Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

The other thing to keep in mind that if a point in time is significant for timing purposes, why don't you have a mark there? That's what marks are for. Marks in V3 serve the same purpose as the grid does in timeslice based editors. The concept is that a grid is arbritrary and doesn't correlate to the music you're sequencing to. Marks on the other hand correlate directly to something meaningful in the music. (Such as a beat, note, bar, etc). It stands to reason that if you want to align effects to a particular point in time, that the reason for that point in time has something to do with the music. If a mark were there, effects would snap to it and alignment would be a no-brainer. Setting up marks should be one of the first things you do when starting a new sequence.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
Page 1 / 2
Share: