I finally got my Pi to send data to my BBB today after awhile! Now my next hurdle is that I set up a pixel grid element in Vixen 3, set it horizontal with 48 rows and 64 columns since I have a 3 (H) x 2 (W) matrix. Color handling was set to RGB and I am unsure what to set for the dimming curve. I have P10 panels connected to a BBB and setup with Falcon Player. In Vixen 3 I set up the matrix in the vixen preview. I add and effect in the sequence editor and it displays fine. My problem is the physical display. It seems to be off by 12 pixels to the right. It is not centered as you see in the video. I tried different orientations in FPP and down was the only one that worked for me. Except that it's off by 12.
So what dimming curve am I supposed to use for the P10 panels? If any.
Then does anyone know why it's displaying out of alignment physically but not in vixen preview?
https://photos.app.goo.gl/9MqfXdjTdQkC5g3PA
Looks like the starting channel is off by 12 pixels. What's on the two controllers you have listed before the BBB in the Vixen Controllers setup? Click on the + to open those up so we can see how you've assigned the channels.
pixelpuppy wrote:Looks like the starting channel is off by 12. What's on the two controllers you have listed before the BBB in the Vixen Controllers setup? Click on the + to open those up so we can see how you've assigned the channels.
That makes sense. I did notice it was lighting up a couple of pixels on the top left as well.
The problem is those two controllers before the BBB are assigned 36 channels (24 channels on the 1st one, 12 channels on the 2nd one) which is equal to 12 pixels (each pixel is 3 channels) So your panel matrix starts at channel 37 in Vixen but you have it starting on channel 1 in FPP. Change the matrix setting in FPP to start on channel 37 and that should fix it.
The pixels lit up on the top left are because they are getting the channel data for the other controllers (channels 1-36)
pixelpuppy wrote:The problem is those two controllers before the BBB are assigned 36 channels (24 channels on the 1st one, 12 channels on the 2nd one) which is equal to 12 pixels (each pixel is 3 channels) So your panel matrix starts at channel 37 in Vixen but you have it starting on channel 1 in FPP. Change the matrix setting in FPP to start on channel 37 and that should fix it.The pixels lit up on the top left are because they are getting the channel data for the other controllers (channels 1-36)
Wow. Something so simple. I should have noticed that. It worked! Thank you so much! 😀






