Notifications
Clear all

Pixelnet

14 Posts
4 Users
0 Reactions
4,943 Views
Posts: 127
Topic starter
(@t-jo13)
Estimable Member
Joined: 15 years ago

If everything goes as planned it will be around 20,000 channels. That is if it goes as planned lol. Here is a rough plan. Fpp to Fpd to 16 port hub to 4 f8s for window matrixes, 4 port hubs connected to 16 port hub to 16 arches and 20 mini trees, ect. That is the rough plan. There will be 2 mini mega trees as well with roofline lights and rgb icicles. Everything will be rgb

Joe


Reply
Posts: 127
Topic starter
(@t-jo13)
Estimable Member
Joined: 15 years ago
layout

I receivrd my new computer and am ready to patch to my controllers correctly. I have included an image showing the rough layout of controllers. It might change some more or less. But you get the Idea. If understand it I can make one controller and assign channels per each element.
As an example:
Fpd outputs 32,000 channels - name it ( show controller ) which is 64 512 channel universes
First F16 start at channel 1 to 4096
Second F16 4097 to 8192 and so on.
What is getting me is the universe setup. As stated before a pixelnet universe is 4096 channels , so can I assign 4096 channels in v3 for each universe that I want.
Universe 1 - 4096

Universe 2 - 4096
Ect.

4096 pixelnet channels equal 8 -512 dmx universe which if I had to go that way then would I set it up:
U1 - 512
U 2 - 512
U 3 - 512
U 4 - 512
Ect. To universe 8 , and do this same setup for each board 1-8, 1-4 , ect with all boards but then what would I do for each ssc/ usc
As they can output aprox 450 channels each which would make each one basically its own universe.
Hopefully I explained it enough as its really hard to type what I am trying to ask.

Joe


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

What's confusing you is that you're trying to merge all of the steps into one. In vixen forget about universes and 4096. Don't even think about that until you get it over to FPP. There's no need to set up universes in vixen if you're not going to use vixen to output. And you can't output pixelnet in vixen so you won't be able to set it up anyhow.
Just create a controller, Any kind of controller. Then set it to a size of 32000. Patch all your stuff in the order you need it in FPP. Then when you get to FPP you do all of the setup for your output protocols.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
Posts: 127
Topic starter
(@t-jo13)
Estimable Member
Joined: 15 years ago

Gotcha :v:
As always thank you for setting me straight. With dmx and some rgb it was easy ( only because I had done it for awhile) But going all rgb this year it seems I am overthinking it too much. Better now than in november when I really need my brain lol.

Joe


Reply
Page 2 / 2
Share: