need help setting u...
 
Notifications
Clear all

need help setting up 50 pixel string in elements

10 Posts
5 Users
0 Reactions
5,315 Views
Posts: 12
Topic starter
(@spader25)
Eminent Member
Joined: 9 years ago
[#49317]

I'm new to vixen and still trying to figure it all out
I'm making a prop for Halloween and I need 1-25 pixels to chase green and 26-50 to do candle flicked.
How do I set this up in the elements?

Thank you!!


9 Replies
gassy
Posts: 548
(@gassy)
Honorable Member
Joined: 17 years ago

I'm a novice myself. Not sure it's the right way but in setup I would select pixels 1-25 and create a new group and do the same with 26-50. Now you can place a chase on one group and the candle flicker on the other.


Reply
Posts: 12
Topic starter
(@spader25)
Eminent Member
Joined: 9 years ago

That's what I thought too. Do I set it up as a single element and then right click and "add group"? I'm getting confused on doing the element setup part.


Reply
gassy
Posts: 548
(@gassy)
Honorable Member
Joined: 17 years ago

yes. You then should have 3 elements that you can add effects to.


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

You are falling into a classic trap. Create groups for your elements and put pixels in each group starting at number one. DO NOT reflect strings ports or controllers in your elements, element names or the pixels that make up the elements. You assign pixels in the elements to channels going to a controller when you are in the patching step. Prior to patching, ignore the real world restrictions.


Reply
Page 1 / 2
Share: