Max Frames Per Seco...
 
Notifications
Clear all

Max Frames Per Second?

18 Posts
7 Users
0 Reactions
13.2 K Views
Posts: 672
(@pixelpuppy)
Honorable Member
Joined: 12 years ago
MartinMueller2003 wrote:Hmm. We are getting different numbers. My calculations show 40fps using WS281x pixels can support up to ~650 pixels. I tell generally people to stop at 600 (a nice round number).

The "new" ws2811 spec calls for 280 uSec frame reset gap (this allows compatibility with the new 2813/2815/2818 backup data protocol). This is how I calculated it: A 25ms frame minus the 280uSec frame reset gap leaves 24,720 uSec for pixel data. At 800kbps a 24bit pixel takes 30uSec. So 24,720/30=824 pixel per frame max at 40fps (25ms). That is according to the ws2811 spec on paper as I understand it.

Of course, other factors, like controller hardware/software can change those numbers. When I spoke to David Pitts (who designed the F16 controllers) he said the controller switches from a fixed 40fps to a fixed 20fps at "around 800 pixels", so that's the number I go with when talking about the F16 controllers. The PiCap is a different animal and I would go with Dans numbers for that. Other controllers may have other limitations as well.


Reply
Posts: 672
(@pixelpuppy)
Honorable Member
Joined: 12 years ago

[duplicate post deleted]


Reply
Posts: 459
(@shockwave)
Reputable Member
Joined: 15 years ago

If you use any serially commanded stuff, Reynard or rs232, you'll be happier at 20fps (50ms). That's because Serial ports are a bit on the slow side, and you gotta shove a lot of data for a lotta lights.
However, if you are using ethernet connections, say a FPP to e682, you'll be happier at 40hz (25ms). Even slow ethernet will 10,000Kbps... most are 10x or 100x even that. So you can make the show have better transistions and color fades going at 40Fps instead of 20Fps.

To the viewer, the difference is merely the 40FPS display looks "slicker", since it updates more often.

My sequences in FPP are 40fps. The Auxillary computer that drives the display when only music and no sequence comes out the FPP, runs at 20Fps. Both are perfectly acceptable. And in fact, if you have a gargantuan display with 20000 channels, you may want to drop to 20fps just so the network can handle it all. But I've never come close to overwhelming my switch.


Reply
Page 4 / 4
Share: