Lip sync - edit ima...
 
Notifications
Clear all

Lip sync - edit image maps

12 Posts
4 Users
0 Reactions
3,733 Views
Posts: 77
Topic starter
(@larsande)
Estimable Member
Joined: 10 years ago
[#49941]

hi just upgrade vixen to version 3.5u4.

I am struggling with the edit image maps in lip sync. So I used to import picture and then I could ajust the picture pixel by pixel. That seems not to be the case anymore. No an external tool is opening instead. If I work with a image that is 12 *12 then it was nice I could change the pixel on the fly. On some of my configuration it seems as the images are gone when I upgrade the sequence to the newest vixen version.

Am I missing something?


11 Replies
JCook
Posts: 1003
(@jcook)
Noble Member
Joined: 13 years ago
larsande wrote:hi just upgrade vixen to version 3.5u4.

I am struggling with the edit image maps in lip sync. So I used to import picture and then I could ajust the picture pixel by pixel. That seems not to be the case anymore. No an external tool is opening instead. If I work with a image that is 12 *12 then it was nice I could change the pixel on the fly. On some of my configuration it seems as the images are gone when I upgrade the sequence to the newest vixen version.

Am I missing something?

you can't do that anymore. It was really slow too. I do a lot of lip sync and I use PiskelApp online to create / edit my images then just import into Vixen and they look great.


Reply
jeffu231
Posts: 2457
(@jeffu231)
Famed Member
Joined: 15 years ago

We removed the pixel by pixel editing because it was not that great and there are other apps like Piskel that are far superior to do that type of work in.


Reply
JCook
Posts: 1003
(@jcook)
Noble Member
Joined: 13 years ago
Reply
Posts: 77
Topic starter
(@larsande)
Estimable Member
Joined: 10 years ago

Ok thanks for the reply. On my existing setup what happen to the bitmaps I had attached to the different phonetic sounds?, they seems to be gone after the upgrade to the newest version.


Reply
Posts: 376
(@gnarmstr)
Reputable Member
Joined: 13 years ago
larsande wrote:Ok thanks for the reply. On my existing setup what happen to the bitmaps I had attached to the different phonetic sounds?, they seems to be gone after the upgrade to the newest version.

They should be in your Vixen Profile folder under Module Data Files\Lipsync


Reply
Posts: 77
Topic starter
(@larsande)
Estimable Member
Joined: 10 years ago

The seems to be a bug in the Image Maps editor. An example. I have a Image mapping that is 12 * 12 pixels (144 pixels all in all). The bottom row seems to be moved one row up. So the bottom row of the image is shown on row 2 (looking from bottom and up) and so on. This means that the top row of the image itselves is not shown. In the preview I can see that it only show 11 of the 12 rows. So I tested my mapping both with text effect and level effect and here it works fine. The bottom row is shown so it is mapped correct.


Reply
jeffu231
Posts: 2457
(@jeffu231)
Famed Member
Joined: 15 years ago

If you are running 3.5u4, you can adjust the offset in the Lipsync effect to compensate for any alignment issues.


Reply
Posts: 77
Topic starter
(@larsande)
Estimable Member
Joined: 10 years ago

Hi Jeff, yes I am running 3.5u4. Could you give me an concrete example on how to ajust this?, because I can´t understand how I can ajust for the effect who seem to forget the first row.


Reply
Posts: 376
(@gnarmstr)
Reputable Member
Joined: 13 years ago

Have you tried changing the x and y offsets of the effect. In the Effect Editor once Image Mapping is selected in the Mapping Type the offsets will become visible.


Reply
Page 1 / 2
Share: