Those are the default ones there and they are re just the mouths. Probably not useful other than some simple testing to see how it works. Replacing them is easy to do, but you need the image set to use. There are sources on the web for those images, or you can make your own if you have the ability.
Sent from my iPhone using Tapatalk
I got the vixen images to show up. I was only seeing a green tree.
Do the images need to have a solid color background, or can i control the background color through vixen?
It's been a while since I've done it myself, but AFAIK, the lipsync images are just images. The Lip Sync effect is basically just flipping images when the phoneme changes. So all of the same things apply as any other images. You can use layering to make the face appear over other effects.
Now that i can see my tree again, i played around with Piskel app and came up with this. Im thinking my 16x50 tree just wont image even pixel level well.
This is the image a created in Piskel. I used the vixen preview for the tree, and actually counted the nodes i wanted to line up to make the face. Zits were added to be sure i had the right image
This is how it looked in the preview when i add it as a picture - looks pretty good
Then the live preview - not so happy looking face
My first thing would be gamma curves on the outputs. Your colors seem to be washed out which is probably because the midtones are too hot. Try adding dimming curves in the patching chain and then use the function based curve generator when you're setting up the curve. The example in that form is for a reasonable gamma curve you can copy from.
Secondly, the tree in preview doesn't seem to look exactly like the real one. Is the model in preview as close as possible to the real thing? Something looks off with the density and/or angle.
The real tree image was just a quick cell phone pic, the tree really isn't leaning, and there is still more on top. Colors don't look bad in person. My concern is the white between the eyes, and the mouth that looks like it melted. I believe the preview setup of the tree is pretty close to what it looks like.
The white between the eyes and the mouth are probably gamma related. It looks like there's some shading in the preview that is appearing as full brightness color in the real tree.
Actually. Now that i'm looking again, It looks like the strings are out of order on the real tree. Look to the left and right of the tongue, it looks like there's some green pixels on one string (on each side) and then back to tongue on the next one. Similar with the eyes, but on strings that look correct in the mouth. Are you doing this as a locations or strings based effect? Try the opposite and see if the behavior changes.
As Jon mentioned above you’ve definitely have strings in the wrong order. This can be messed up in a number of ways.
I’d be curious to know your physical wiring of this tree as well as your display setup and controller configuration.
In your picture the whole tree is a mirror image of the preview. (Notice the lower pimple switches sides)
At least strings 5&6,7&8,9&10 and 11&12 are swapped from where they should be. My guess is there has either been a zig zag done twice or you didn’t wire this tree according to how Vixen knows it to be.
Either way you need to get the basics down so you know your preview tree exactly matches the physical tree.
Typically when troubleshooting tree string setup I will just put a set level on string one and make sure the leftmost string on the real tree lights up.
You can use the same logic by putting a set level on the first pixel of the first string and make sure the lower left pixel lights up.
I guess i never thought of the strings order, they could be mirrored based on vixen preview starting point. With what i have done so far, i was not concerned about mirror image.
The tree is 16 strings (12v) on 8 channels. Each channel has 50 up and 50 down. I inject power at the end of the second string. I don't recall which, but one wire is not connected between pixel 50 and 51.
The E682 setup page has zig zag on every 50, don't have access to it right now. No zigzag setup in Vixen. With everything else messed up lately, this is something i will look into tonight. That may explain why some other things (arches) just don't look right.
